server-skynet-source-3rd-je.../Makefile.in

565 lines
21 KiB
Makefile
Raw Normal View History

# Clear out all vpaths, then set just one (default vpath) for the main build
# directory.
vpath
vpath % .
# Clear the default suffixes, so that built-in rules are not used.
.SUFFIXES :
SHELL := /bin/sh
CC := @CC@
CXX := @CXX@
# Configuration parameters.
DESTDIR =
BINDIR := $(DESTDIR)@BINDIR@
INCLUDEDIR := $(DESTDIR)@INCLUDEDIR@
LIBDIR := $(DESTDIR)@LIBDIR@
DATADIR := $(DESTDIR)@DATADIR@
MANDIR := $(DESTDIR)@MANDIR@
srcroot := @srcroot@
objroot := @objroot@
abs_srcroot := @abs_srcroot@
abs_objroot := @abs_objroot@
# Build parameters.
CPPFLAGS := @CPPFLAGS@ -I$(srcroot)include -I$(objroot)include
CONFIGURE_CFLAGS := @CONFIGURE_CFLAGS@
SPECIFIED_CFLAGS := @SPECIFIED_CFLAGS@
EXTRA_CFLAGS := @EXTRA_CFLAGS@
CFLAGS := $(strip $(CONFIGURE_CFLAGS) $(SPECIFIED_CFLAGS) $(EXTRA_CFLAGS))
CONFIGURE_CXXFLAGS := @CONFIGURE_CXXFLAGS@
SPECIFIED_CXXFLAGS := @SPECIFIED_CXXFLAGS@
EXTRA_CXXFLAGS := @EXTRA_CXXFLAGS@
CXXFLAGS := $(strip $(CONFIGURE_CXXFLAGS) $(SPECIFIED_CXXFLAGS) $(EXTRA_CXXFLAGS))
LDFLAGS := @LDFLAGS@
EXTRA_LDFLAGS := @EXTRA_LDFLAGS@
LIBS := @LIBS@
RPATH_EXTRA := @RPATH_EXTRA@
SO := @so@
IMPORTLIB := @importlib@
O := @o@
A := @a@
EXE := @exe@
2012-04-22 12:27:46 +08:00
LIBPREFIX := @libprefix@
REV := @rev@
install_suffix := @install_suffix@
ABI := @abi@
XSLTPROC := @XSLTPROC@
AUTOCONF := @AUTOCONF@
_RPATH = @RPATH@
RPATH = $(if $(1),$(call _RPATH,$(1)))
cfghdrs_in := $(addprefix $(srcroot),@cfghdrs_in@)
cfghdrs_out := @cfghdrs_out@
cfgoutputs_in := $(addprefix $(srcroot),@cfgoutputs_in@)
cfgoutputs_out := @cfgoutputs_out@
enable_autogen := @enable_autogen@
enable_code_coverage := @enable_code_coverage@
enable_prof := @enable_prof@
enable_zone_allocator := @enable_zone_allocator@
MALLOC_CONF := @JEMALLOC_CPREFIX@MALLOC_CONF
link_whole_archive := @link_whole_archive@
DSO_LDFLAGS = @DSO_LDFLAGS@
SOREV = @SOREV@
PIC_CFLAGS = @PIC_CFLAGS@
CTARGET = @CTARGET@
LDTARGET = @LDTARGET@
TEST_LD_MODE = @TEST_LD_MODE@
MKLIB = @MKLIB@
2013-08-11 22:44:59 +08:00
AR = @AR@
ARFLAGS = @ARFLAGS@
CC_MM = @CC_MM@
LM := @LM@
INSTALL = @INSTALL@
ifeq (macho, $(ABI))
2012-04-22 12:27:46 +08:00
TEST_LIBRARY_PATH := DYLD_FALLBACK_LIBRARY_PATH="$(objroot)lib"
else
ifeq (pecoff, $(ABI))
TEST_LIBRARY_PATH := PATH="$(PATH):$(objroot)lib"
else
TEST_LIBRARY_PATH :=
endif
2012-04-22 12:27:46 +08:00
endif
2012-04-22 12:27:46 +08:00
LIBJEMALLOC := $(LIBPREFIX)jemalloc$(install_suffix)
# Lists of files.
BINS := $(objroot)bin/jemalloc-config $(objroot)bin/jemalloc.sh $(objroot)bin/jeprof
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
C_HDRS := $(objroot)include/jemalloc/jemalloc$(install_suffix).h
C_SRCS := $(srcroot)src/jemalloc.c \
$(srcroot)src/arena.c \
$(srcroot)src/atomic.c \
$(srcroot)src/base.c \
$(srcroot)src/bitmap.c \
$(srcroot)src/ckh.c \
$(srcroot)src/ctl.c \
$(srcroot)src/extent.c \
$(srcroot)src/extent_dss.c \
$(srcroot)src/extent_mmap.c \
$(srcroot)src/hash.c \
2016-06-01 05:50:21 +08:00
$(srcroot)src/large.c \
$(srcroot)src/mb.c \
$(srcroot)src/mutex.c \
$(srcroot)src/nstime.c \
$(srcroot)src/pages.c \
$(srcroot)src/prng.c \
$(srcroot)src/prof.c \
$(srcroot)src/rtree.c \
$(srcroot)src/stats.c \
$(srcroot)src/spin.c \
$(srcroot)src/tcache.c \
$(srcroot)src/ticker.c \
$(srcroot)src/tsd.c \
$(srcroot)src/util.c \
$(srcroot)src/witness.c
ifeq ($(enable_zone_allocator), 1)
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
C_SRCS += $(srcroot)src/zone.c
endif
ifeq ($(IMPORTLIB),$(SO))
STATIC_LIBS := $(objroot)lib/$(LIBJEMALLOC).$(A)
endif
ifdef PIC_CFLAGS
STATIC_LIBS += $(objroot)lib/$(LIBJEMALLOC)_pic.$(A)
else
STATIC_LIBS += $(objroot)lib/$(LIBJEMALLOC)_s.$(A)
endif
DSOS := $(objroot)lib/$(LIBJEMALLOC).$(SOREV)
ifneq ($(SOREV),$(SO))
DSOS += $(objroot)lib/$(LIBJEMALLOC).$(SO)
endif
ifeq (1, $(link_whole_archive))
LJEMALLOC := -Wl,--whole-archive -L$(objroot)lib -l$(LIBJEMALLOC) -Wl,--no-whole-archive
else
LJEMALLOC := $(objroot)lib/$(LIBJEMALLOC).$(IMPORTLIB)
endif
PC := $(objroot)jemalloc.pc
MAN3 := $(objroot)doc/jemalloc$(install_suffix).3
DOCS_XML := $(objroot)doc/jemalloc$(install_suffix).xml
2014-12-24 06:09:32 +08:00
DOCS_HTML := $(DOCS_XML:$(objroot)%.xml=$(objroot)%.html)
DOCS_MAN3 := $(DOCS_XML:$(objroot)%.xml=$(objroot)%.3)
DOCS := $(DOCS_HTML) $(DOCS_MAN3)
C_TESTLIB_SRCS := $(srcroot)test/src/btalloc.c $(srcroot)test/src/btalloc_0.c \
$(srcroot)test/src/btalloc_1.c $(srcroot)test/src/math.c \
2015-07-22 07:45:35 +08:00
$(srcroot)test/src/mtx.c $(srcroot)test/src/mq.c \
$(srcroot)test/src/SFMT.c $(srcroot)test/src/test.c \
$(srcroot)test/src/thd.c $(srcroot)test/src/timer.c
ifeq (1, $(link_whole_archive))
C_UTIL_INTEGRATION_SRCS :=
C_UTIL_CPP_SRCS :=
else
C_UTIL_INTEGRATION_SRCS := $(srcroot)src/nstime.c $(srcroot)src/util.c
C_UTIL_CPP_SRCS := $(srcroot)src/nstime.c $(srcroot)src/util.c
endif
TESTS_UNIT := \
2016-05-08 03:42:31 +08:00
$(srcroot)test/unit/a0.c \
$(srcroot)test/unit/arena_reset.c \
$(srcroot)test/unit/atomic.c \
$(srcroot)test/unit/base.c \
$(srcroot)test/unit/bitmap.c \
$(srcroot)test/unit/ckh.c \
$(srcroot)test/unit/decay.c \
$(srcroot)test/unit/extent_quantize.c \
$(srcroot)test/unit/fork.c \
$(srcroot)test/unit/hash.c \
$(srcroot)test/unit/junk.c \
$(srcroot)test/unit/junk_alloc.c \
$(srcroot)test/unit/junk_free.c \
$(srcroot)test/unit/mallctl.c \
$(srcroot)test/unit/math.c \
$(srcroot)test/unit/mq.c \
$(srcroot)test/unit/mtx.c \
$(srcroot)test/unit/pack.c \
$(srcroot)test/unit/pages.c \
2016-03-01 03:30:34 +08:00
$(srcroot)test/unit/ph.c \
$(srcroot)test/unit/prng.c \
$(srcroot)test/unit/prof_accum.c \
$(srcroot)test/unit/prof_active.c \
$(srcroot)test/unit/prof_gdump.c \
$(srcroot)test/unit/prof_idump.c \
$(srcroot)test/unit/prof_reset.c \
$(srcroot)test/unit/prof_tctx.c \
$(srcroot)test/unit/prof_thread_name.c \
$(srcroot)test/unit/ql.c \
$(srcroot)test/unit/qr.c \
$(srcroot)test/unit/rb.c \
$(srcroot)test/unit/rtree.c \
$(srcroot)test/unit/SFMT.c \
$(srcroot)test/unit/size_classes.c \
$(srcroot)test/unit/slab.c \
$(srcroot)test/unit/smoothstep.c \
$(srcroot)test/unit/spin.c \
$(srcroot)test/unit/stats.c \
$(srcroot)test/unit/stats_print.c \
$(srcroot)test/unit/ticker.c \
$(srcroot)test/unit/nstime.c \
$(srcroot)test/unit/tsd.c \
$(srcroot)test/unit/util.c \
$(srcroot)test/unit/witness.c \
$(srcroot)test/unit/zero.c
ifeq (@enable_prof@, 1)
TESTS_UNIT += \
$(srcroot)test/unit/arena_reset_prof.c
endif
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
TESTS_INTEGRATION := $(srcroot)test/integration/aligned_alloc.c \
$(srcroot)test/integration/allocated.c \
$(srcroot)test/integration/extent.c \
$(srcroot)test/integration/mallocx.c \
$(srcroot)test/integration/MALLOCX_ARENA.c \
$(srcroot)test/integration/overflow.c \
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
$(srcroot)test/integration/posix_memalign.c \
$(srcroot)test/integration/rallocx.c \
$(srcroot)test/integration/sdallocx.c \
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
$(srcroot)test/integration/thread_arena.c \
$(srcroot)test/integration/thread_tcache_enabled.c \
$(srcroot)test/integration/xallocx.c
ifeq (@enable_cxx@, 1)
CPP_SRCS := $(srcroot)src/jemalloc_cpp.cpp
TESTS_INTEGRATION_CPP := $(srcroot)test/integration/cpp/basic.cpp
else
CPP_SRCS :=
TESTS_INTEGRATION_CPP :=
endif
2014-09-08 10:58:04 +08:00
TESTS_STRESS := $(srcroot)test/stress/microbench.c
TESTS := $(TESTS_UNIT) $(TESTS_INTEGRATION) $(TESTS_INTEGRATION_CPP) $(TESTS_STRESS)
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
C_OBJS := $(C_SRCS:$(srcroot)%.c=$(objroot)%.$(O))
CPP_OBJS := $(CPP_SRCS:$(srcroot)%.cpp=$(objroot)%.$(O))
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
C_PIC_OBJS := $(C_SRCS:$(srcroot)%.c=$(objroot)%.pic.$(O))
CPP_PIC_OBJS := $(CPP_SRCS:$(srcroot)%.cpp=$(objroot)%.pic.$(O))
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
C_JET_OBJS := $(C_SRCS:$(srcroot)%.c=$(objroot)%.jet.$(O))
C_TESTLIB_UNIT_OBJS := $(C_TESTLIB_SRCS:$(srcroot)%.c=$(objroot)%.unit.$(O))
C_TESTLIB_INTEGRATION_OBJS := $(C_TESTLIB_SRCS:$(srcroot)%.c=$(objroot)%.integration.$(O))
C_UTIL_INTEGRATION_OBJS := $(C_UTIL_INTEGRATION_SRCS:$(srcroot)%.c=$(objroot)%.integration.$(O))
C_TESTLIB_STRESS_OBJS := $(C_TESTLIB_SRCS:$(srcroot)%.c=$(objroot)%.stress.$(O))
C_TESTLIB_OBJS := $(C_TESTLIB_UNIT_OBJS) $(C_TESTLIB_INTEGRATION_OBJS) $(C_UTIL_INTEGRATION_OBJS) $(C_TESTLIB_STRESS_OBJS)
TESTS_UNIT_OBJS := $(TESTS_UNIT:$(srcroot)%.c=$(objroot)%.$(O))
TESTS_INTEGRATION_OBJS := $(TESTS_INTEGRATION:$(srcroot)%.c=$(objroot)%.$(O))
TESTS_INTEGRATION_CPP_OBJS := $(TESTS_INTEGRATION_CPP:$(srcroot)%.cpp=$(objroot)%.$(O))
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
TESTS_STRESS_OBJS := $(TESTS_STRESS:$(srcroot)%.c=$(objroot)%.$(O))
TESTS_OBJS := $(TESTS_UNIT_OBJS) $(TESTS_INTEGRATION_OBJS) $(TESTS_STRESS_OBJS)
TESTS_CPP_OBJS := $(TESTS_INTEGRATION_CPP_OBJS)
.PHONY: all dist build_doc_html build_doc_man build_doc
.PHONY: install_bin install_include install_lib
.PHONY: install_doc_html install_doc_man install_doc install
.PHONY: tests check clean distclean relclean
.SECONDARY : $(TESTS_OBJS) $(TESTS_CPP_OBJS)
# Default target.
all: build_lib
dist: build_doc
2014-12-24 06:09:32 +08:00
$(objroot)doc/%.html : $(objroot)doc/%.xml $(srcroot)doc/stylesheet.xsl $(objroot)doc/html.xsl
$(XSLTPROC) -o $@ $(objroot)doc/html.xsl $<
2014-12-24 06:09:32 +08:00
$(objroot)doc/%.3 : $(objroot)doc/%.xml $(srcroot)doc/stylesheet.xsl $(objroot)doc/manpages.xsl
$(XSLTPROC) -o $@ $(objroot)doc/manpages.xsl $<
build_doc_html: $(DOCS_HTML)
build_doc_man: $(DOCS_MAN3)
build_doc: $(DOCS)
#
# Include generated dependency files.
#
ifdef CC_MM
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
-include $(C_OBJS:%.$(O)=%.d)
-include $(CPP_OBJS:%.$(O)=%.d)
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
-include $(C_PIC_OBJS:%.$(O)=%.d)
-include $(CPP_PIC_OBJS:%.$(O)=%.d)
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
-include $(C_JET_OBJS:%.$(O)=%.d)
-include $(C_TESTLIB_OBJS:%.$(O)=%.d)
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
-include $(TESTS_OBJS:%.$(O)=%.d)
-include $(TESTS_CPP_OBJS:%.$(O)=%.d)
endif
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
$(C_OBJS): $(objroot)src/%.$(O): $(srcroot)src/%.c
$(CPP_OBJS): $(objroot)src/%.$(O): $(srcroot)src/%.cpp
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
$(C_PIC_OBJS): $(objroot)src/%.pic.$(O): $(srcroot)src/%.c
$(C_PIC_OBJS): CFLAGS += $(PIC_CFLAGS)
$(CPP_PIC_OBJS): $(objroot)src/%.pic.$(O): $(srcroot)src/%.cpp
$(CPP_PIC_OBJS): CXXFLAGS += $(PIC_CFLAGS)
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
$(C_JET_OBJS): $(objroot)src/%.jet.$(O): $(srcroot)src/%.c
$(C_JET_OBJS): CFLAGS += -DJEMALLOC_JET
$(C_TESTLIB_UNIT_OBJS): $(objroot)test/src/%.unit.$(O): $(srcroot)test/src/%.c
$(C_TESTLIB_UNIT_OBJS): CPPFLAGS += -DJEMALLOC_UNIT_TEST
$(C_TESTLIB_INTEGRATION_OBJS): $(objroot)test/src/%.integration.$(O): $(srcroot)test/src/%.c
$(C_TESTLIB_INTEGRATION_OBJS): CPPFLAGS += -DJEMALLOC_INTEGRATION_TEST
$(C_UTIL_INTEGRATION_OBJS): $(objroot)src/%.integration.$(O): $(srcroot)src/%.c
$(C_TESTLIB_STRESS_OBJS): $(objroot)test/src/%.stress.$(O): $(srcroot)test/src/%.c
$(C_TESTLIB_STRESS_OBJS): CPPFLAGS += -DJEMALLOC_STRESS_TEST -DJEMALLOC_STRESS_TESTLIB
$(C_TESTLIB_OBJS): CPPFLAGS += -I$(srcroot)test/include -I$(objroot)test/include
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
$(TESTS_UNIT_OBJS): CPPFLAGS += -DJEMALLOC_UNIT_TEST
$(TESTS_INTEGRATION_OBJS): CPPFLAGS += -DJEMALLOC_INTEGRATION_TEST
$(TESTS_INTEGRATION_CPP_OBJS): CPPFLAGS += -DJEMALLOC_INTEGRATION_CPP_TEST
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
$(TESTS_STRESS_OBJS): CPPFLAGS += -DJEMALLOC_STRESS_TEST
$(TESTS_OBJS): $(objroot)test/%.$(O): $(srcroot)test/%.c
$(TESTS_CPP_OBJS): $(objroot)test/%.$(O): $(srcroot)test/%.cpp
$(TESTS_OBJS): CPPFLAGS += -I$(srcroot)test/include -I$(objroot)test/include
$(TESTS_CPP_OBJS): CPPFLAGS += -I$(srcroot)test/include -I$(objroot)test/include
ifneq ($(IMPORTLIB),$(SO))
$(CPP_OBJS) $(C_OBJS) $(C_JET_OBJS): CPPFLAGS += -DDLLEXPORT
endif
ifndef CC_MM
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
# Dependencies.
HEADER_DIRS = $(srcroot)include/jemalloc/internal \
$(objroot)include/jemalloc $(objroot)include/jemalloc/internal
HEADERS = $(wildcard $(foreach dir,$(HEADER_DIRS),$(dir)/*.h))
$(C_OBJS) $(CPP_OBJS) $(C_PIC_OBJS) $(CPP_PIC_OBJS) $(C_JET_OBJS) $(C_TESTLIB_OBJS) $(TESTS_OBJS): $(HEADERS)
$(TESTS_OBJS) $(TESTS_CPP_OBJS): $(objroot)test/include/test/jemalloc_test.h
endif
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
$(C_OBJS) $(C_PIC_OBJS) $(C_JET_OBJS) $(C_TESTLIB_OBJS) $(TESTS_OBJS): %.$(O):
@mkdir -p $(@D)
$(CC) $(CFLAGS) -c $(CPPFLAGS) $(CTARGET) $<
ifdef CC_MM
@$(CC) -MM $(CPPFLAGS) -MT $@ -o $(@:%.$(O)=%.d) $<
endif
$(CPP_OBJS) $(CPP_PIC_OBJS) $(TESTS_CPP_OBJS): %.$(O):
@mkdir -p $(@D)
$(CXX) $(CXXFLAGS) -c $(CPPFLAGS) $(CTARGET) $<
ifdef CC_MM
@$(CXX) -MM $(CPPFLAGS) -MT $@ -o $(@:%.$(O)=%.d) $<
endif
ifneq ($(SOREV),$(SO))
%.$(SO) : %.$(SOREV)
@mkdir -p $(@D)
ln -sf $(<F) $@
endif
$(objroot)lib/$(LIBJEMALLOC).$(SOREV) : $(if $(PIC_CFLAGS),$(C_PIC_OBJS),$(C_OBJS)) $(if $(PIC_CFLAGS),$(CPP_PIC_OBJS),$(CPP_OBJS))
@mkdir -p $(@D)
$(CC) $(DSO_LDFLAGS) $(call RPATH,$(RPATH_EXTRA)) $(LDTARGET) $+ $(LDFLAGS) $(LIBS) $(EXTRA_LDFLAGS)
$(objroot)lib/$(LIBJEMALLOC)_pic.$(A) : $(C_PIC_OBJS) $(CPP_PIC_OBJS)
$(objroot)lib/$(LIBJEMALLOC).$(A) : $(C_OBJS) $(CPP_OBJS)
$(objroot)lib/$(LIBJEMALLOC)_s.$(A) : $(C_OBJS) $(CPP_OBJS)
$(STATIC_LIBS):
@mkdir -p $(@D)
$(AR) $(ARFLAGS)@AROUT@ $+
$(objroot)test/unit/%$(EXE): $(objroot)test/unit/%.$(O) $(TESTS_UNIT_LINK_OBJS) $(C_JET_OBJS) $(C_TESTLIB_UNIT_OBJS)
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
@mkdir -p $(@D)
$(CC) $(LDTARGET) $(filter %.$(O),$^) $(call RPATH,$(objroot)lib) $(LDFLAGS) $(filter-out -lm,$(LIBS)) $(LM) $(EXTRA_LDFLAGS)
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
$(objroot)test/integration/%$(EXE): $(objroot)test/integration/%.$(O) $(C_TESTLIB_INTEGRATION_OBJS) $(C_UTIL_INTEGRATION_OBJS) $(objroot)lib/$(LIBJEMALLOC).$(IMPORTLIB)
@mkdir -p $(@D)
$(CC) $(TEST_LD_MODE) $(LDTARGET) $(filter %.$(O),$^) $(call RPATH,$(objroot)lib) $(LJEMALLOC) $(LDFLAGS) $(filter-out -lm,$(filter -lrt -lpthread -lstdc++,$(LIBS))) $(LM) $(EXTRA_LDFLAGS)
$(objroot)test/integration/cpp/%$(EXE): $(objroot)test/integration/cpp/%.$(O) $(C_TESTLIB_INTEGRATION_OBJS) $(C_UTIL_INTEGRATION_OBJS) $(objroot)lib/$(LIBJEMALLOC).$(IMPORTLIB)
@mkdir -p $(@D)
$(CXX) $(LDTARGET) $(filter %.$(O),$^) $(call RPATH,$(objroot)lib) $(objroot)lib/$(LIBJEMALLOC).$(IMPORTLIB) $(LDFLAGS) $(filter-out -lm,$(LIBS)) -lm $(EXTRA_LDFLAGS)
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
$(objroot)test/stress/%$(EXE): $(objroot)test/stress/%.$(O) $(C_JET_OBJS) $(C_TESTLIB_STRESS_OBJS) $(objroot)lib/$(LIBJEMALLOC).$(IMPORTLIB)
@mkdir -p $(@D)
$(CC) $(TEST_LD_MODE) $(LDTARGET) $(filter %.$(O),$^) $(call RPATH,$(objroot)lib) $(objroot)lib/$(LIBJEMALLOC).$(IMPORTLIB) $(LDFLAGS) $(filter-out -lm,$(LIBS)) $(LM) $(EXTRA_LDFLAGS)
build_lib_shared: $(DSOS)
build_lib_static: $(STATIC_LIBS)
build_lib: build_lib_shared build_lib_static
install_bin:
$(INSTALL) -d $(BINDIR)
@for b in $(BINS); do \
echo "$(INSTALL) -m 755 $$b $(BINDIR)"; \
$(INSTALL) -m 755 $$b $(BINDIR); \
done
install_include:
$(INSTALL) -d $(INCLUDEDIR)/jemalloc
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
@for h in $(C_HDRS); do \
echo "$(INSTALL) -m 644 $$h $(INCLUDEDIR)/jemalloc"; \
$(INSTALL) -m 644 $$h $(INCLUDEDIR)/jemalloc; \
done
install_lib_shared: $(DSOS)
$(INSTALL) -d $(LIBDIR)
$(INSTALL) -m 755 $(objroot)lib/$(LIBJEMALLOC).$(SOREV) $(LIBDIR)
ifneq ($(SOREV),$(SO))
ln -sf $(LIBJEMALLOC).$(SOREV) $(LIBDIR)/$(LIBJEMALLOC).$(SO)
endif
install_lib_static: $(STATIC_LIBS)
$(INSTALL) -d $(LIBDIR)
@for l in $(STATIC_LIBS); do \
echo "$(INSTALL) -m 755 $$l $(LIBDIR)"; \
$(INSTALL) -m 755 $$l $(LIBDIR); \
done
2014-09-20 05:01:23 +08:00
install_lib_pc: $(PC)
$(INSTALL) -d $(LIBDIR)/pkgconfig
2014-09-20 05:01:23 +08:00
@for l in $(PC); do \
echo "$(INSTALL) -m 644 $$l $(LIBDIR)/pkgconfig"; \
$(INSTALL) -m 644 $$l $(LIBDIR)/pkgconfig; \
2014-09-20 05:01:23 +08:00
done
install_lib: install_lib_shared install_lib_static install_lib_pc
install_doc_html:
$(INSTALL) -d $(DATADIR)/doc/jemalloc$(install_suffix)
@for d in $(DOCS_HTML); do \
echo "$(INSTALL) -m 644 $$d $(DATADIR)/doc/jemalloc$(install_suffix)"; \
$(INSTALL) -m 644 $$d $(DATADIR)/doc/jemalloc$(install_suffix); \
done
install_doc_man:
$(INSTALL) -d $(MANDIR)/man3
@for d in $(DOCS_MAN3); do \
echo "$(INSTALL) -m 644 $$d $(MANDIR)/man3"; \
$(INSTALL) -m 644 $$d $(MANDIR)/man3; \
done
install_doc: install_doc_html install_doc_man
install: install_bin install_include install_lib install_doc
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
tests_unit: $(TESTS_UNIT:$(srcroot)%.c=$(objroot)%$(EXE))
tests_integration: $(TESTS_INTEGRATION:$(srcroot)%.c=$(objroot)%$(EXE)) $(TESTS_INTEGRATION_CPP:$(srcroot)%.cpp=$(objroot)%$(EXE))
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
tests_stress: $(TESTS_STRESS:$(srcroot)%.c=$(objroot)%$(EXE))
tests: tests_unit tests_integration tests_stress
check_unit_dir:
@mkdir -p $(objroot)test/unit
check_integration_dir:
@mkdir -p $(objroot)test/integration
stress_dir:
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
@mkdir -p $(objroot)test/stress
check_dir: check_unit_dir check_integration_dir
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
check_unit: tests_unit check_unit_dir
$(SHELL) $(objroot)test/test.sh $(TESTS_UNIT:$(srcroot)%.c=$(objroot)%)
check_integration_prof: tests_integration check_integration_dir
ifeq ($(enable_prof), 1)
$(MALLOC_CONF)="prof:true" $(SHELL) $(objroot)test/test.sh $(TESTS_INTEGRATION:$(srcroot)%.c=$(objroot)%) $(TESTS_INTEGRATION_CPP:$(srcroot)%.cpp=$(objroot)%)
$(MALLOC_CONF)="prof:true,prof_active:false" $(SHELL) $(objroot)test/test.sh $(TESTS_INTEGRATION:$(srcroot)%.c=$(objroot)%) $(TESTS_INTEGRATION_CPP:$(srcroot)%.cpp=$(objroot)%)
endif
check_integration_decay: tests_integration check_integration_dir
$(MALLOC_CONF)="decay_time:-1" $(SHELL) $(objroot)test/test.sh $(TESTS_INTEGRATION:$(srcroot)%.c=$(objroot)%) $(TESTS_INTEGRATION_CPP:$(srcroot)%.cpp=$(objroot)%)
$(MALLOC_CONF)="decay_time:0" $(SHELL) $(objroot)test/test.sh $(TESTS_INTEGRATION:$(srcroot)%.c=$(objroot)%) $(TESTS_INTEGRATION_CPP:$(srcroot)%.cpp=$(objroot)%)
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
check_integration: tests_integration check_integration_dir
$(SHELL) $(objroot)test/test.sh $(TESTS_INTEGRATION:$(srcroot)%.c=$(objroot)%) $(TESTS_INTEGRATION_CPP:$(srcroot)%.cpp=$(objroot)%)
stress: tests_stress stress_dir
$(SHELL) $(objroot)test/test.sh $(TESTS_STRESS:$(srcroot)%.c=$(objroot)%)
check: check_unit check_integration check_integration_decay check_integration_prof
ifeq ($(enable_code_coverage), 1)
coverage_unit: check_unit
$(SHELL) $(srcroot)coverage.sh $(srcroot)src jet $(C_JET_OBJS)
$(SHELL) $(srcroot)coverage.sh $(srcroot)test/src unit $(C_TESTLIB_UNIT_OBJS)
$(SHELL) $(srcroot)coverage.sh $(srcroot)test/unit unit $(TESTS_UNIT_OBJS)
coverage_integration: check_integration
$(SHELL) $(srcroot)coverage.sh $(srcroot)src pic $(C_PIC_OBJS)
$(SHELL) $(srcroot)coverage.sh $(srcroot)src integration $(C_UTIL_INTEGRATION_OBJS)
$(SHELL) $(srcroot)coverage.sh $(srcroot)test/src integration $(C_TESTLIB_INTEGRATION_OBJS)
$(SHELL) $(srcroot)coverage.sh $(srcroot)test/integration integration $(TESTS_INTEGRATION_OBJS)
$(SHELL) $(srcroot)coverage.sh $(srcroot)test/integration/cpp integration $(TESTS_INTEGRATION_CPP_OBJS)
coverage_stress: stress
$(SHELL) $(srcroot)coverage.sh $(srcroot)src pic $(C_PIC_OBJS)
$(SHELL) $(srcroot)coverage.sh $(srcroot)src jet $(C_JET_OBJS)
$(SHELL) $(srcroot)coverage.sh $(srcroot)test/src stress $(C_TESTLIB_STRESS_OBJS)
$(SHELL) $(srcroot)coverage.sh $(srcroot)test/stress stress $(TESTS_STRESS_OBJS)
coverage: check
$(SHELL) $(srcroot)coverage.sh $(srcroot)src pic $(C_PIC_OBJS)
$(SHELL) $(srcroot)coverage.sh $(srcroot)src jet $(C_JET_OBJS)
$(SHELL) $(srcroot)coverage.sh $(srcroot)src integration $(C_UTIL_INTEGRATION_OBJS)
$(SHELL) $(srcroot)coverage.sh $(srcroot)test/src unit $(C_TESTLIB_UNIT_OBJS)
$(SHELL) $(srcroot)coverage.sh $(srcroot)test/src integration $(C_TESTLIB_INTEGRATION_OBJS)
$(SHELL) $(srcroot)coverage.sh $(srcroot)test/src stress $(C_TESTLIB_STRESS_OBJS)
$(SHELL) $(srcroot)coverage.sh $(srcroot)test/unit unit $(TESTS_UNIT_OBJS) $(TESTS_UNIT_AUX_OBJS)
$(SHELL) $(srcroot)coverage.sh $(srcroot)test/integration integration $(TESTS_INTEGRATION_OBJS)
$(SHELL) $(srcroot)coverage.sh $(srcroot)test/integration/cpp integration $(TESTS_INTEGRATION_CPP_OBJS)
$(SHELL) $(srcroot)coverage.sh $(srcroot)test/stress integration $(TESTS_STRESS_OBJS)
endif
clean:
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
rm -f $(C_OBJS)
rm -f $(CPP_OBJS)
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
rm -f $(C_PIC_OBJS)
rm -f $(CPP_PIC_OBJS)
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
rm -f $(C_JET_OBJS)
rm -f $(C_TESTLIB_OBJS)
rm -f $(C_OBJS:%.$(O)=%.d)
rm -f $(C_OBJS:%.$(O)=%.gcda)
rm -f $(C_OBJS:%.$(O)=%.gcno)
rm -f $(CPP_OBJS:%.$(O)=%.d)
rm -f $(CPP_OBJS:%.$(O)=%.gcda)
rm -f $(CPP_OBJS:%.$(O)=%.gcno)
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
rm -f $(C_PIC_OBJS:%.$(O)=%.d)
rm -f $(C_PIC_OBJS:%.$(O)=%.gcda)
rm -f $(C_PIC_OBJS:%.$(O)=%.gcno)
rm -f $(CPP_PIC_OBJS:%.$(O)=%.d)
rm -f $(CPP_PIC_OBJS:%.$(O)=%.gcda)
rm -f $(CPP_PIC_OBJS:%.$(O)=%.gcno)
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
rm -f $(C_JET_OBJS:%.$(O)=%.d)
rm -f $(C_JET_OBJS:%.$(O)=%.gcda)
rm -f $(C_JET_OBJS:%.$(O)=%.gcno)
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
rm -f $(C_TESTLIB_OBJS:%.$(O)=%.d)
rm -f $(C_TESTLIB_OBJS:%.$(O)=%.gcda)
rm -f $(C_TESTLIB_OBJS:%.$(O)=%.gcno)
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
rm -f $(TESTS_OBJS:%.$(O)=%$(EXE))
rm -f $(TESTS_OBJS)
rm -f $(TESTS_OBJS:%.$(O)=%.d)
rm -f $(TESTS_OBJS:%.$(O)=%.gcda)
rm -f $(TESTS_OBJS:%.$(O)=%.gcno)
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
rm -f $(TESTS_OBJS:%.$(O)=%.out)
rm -f $(TESTS_CPP_OBJS:%.$(O)=%$(EXE))
rm -f $(TESTS_CPP_OBJS)
rm -f $(TESTS_CPP_OBJS:%.$(O)=%.d)
rm -f $(TESTS_CPP_OBJS:%.$(O)=%.gcda)
rm -f $(TESTS_CPP_OBJS:%.$(O)=%.gcno)
rm -f $(TESTS_CPP_OBJS:%.$(O)=%.out)
rm -f $(DSOS) $(STATIC_LIBS)
rm -f $(objroot)*.gcov.*
distclean: clean
rm -f $(objroot)bin/jemalloc-config
Refactor to support more varied testing. Refactor the test harness to support three types of tests: - unit: White box unit tests. These tests have full access to all internal jemalloc library symbols. Though in actuality all symbols are prefixed by jet_, macro-based name mangling abstracts this away from test code. - integration: Black box integration tests. These tests link with the installable shared jemalloc library, and with the exception of some utility code and configure-generated macro definitions, they have no access to jemalloc internals. - stress: Black box stress tests. These tests link with the installable shared jemalloc library, as well as with an internal allocator with symbols prefixed by jet_ (same as for unit tests) that can be used to allocate data structures that are internal to the test code. Move existing tests into test/{unit,integration}/ as appropriate. Split out internal parts of jemalloc_defs.h.in and put them in jemalloc_internal_defs.h.in. This reduces internals exposure to applications that #include <jemalloc/jemalloc.h>. Refactor jemalloc.h header generation so that a single header file results, and the prototypes can be used to generate jet_ prototypes for tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in, jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and use a shell script to generate a unified jemalloc.h at configure time. Change the default private namespace prefix from "" to "je_". Add missing private namespace mangling. Remove hard-coded private_namespace.h. Instead generate it and private_unnamespace.h from private_symbols.txt. Use similar logic for public symbols, which aids in name mangling for jet_ symbols. Add test_warn() and test_fail(). Replace existing exit(1) calls with test_fail() calls.
2013-12-01 07:25:42 +08:00
rm -f $(objroot)bin/jemalloc.sh
rm -f $(objroot)bin/jeprof
rm -f $(objroot)config.log
rm -f $(objroot)config.status
rm -f $(objroot)config.stamp
rm -f $(cfghdrs_out)
rm -f $(cfgoutputs_out)
relclean: distclean
rm -f $(objroot)configure
rm -f $(objroot)VERSION
rm -f $(DOCS_HTML)
rm -f $(DOCS_MAN3)
#===============================================================================
# Re-configuration rules.
ifeq ($(enable_autogen), 1)
$(srcroot)configure : $(srcroot)configure.ac
cd ./$(srcroot) && $(AUTOCONF)
$(objroot)config.status : $(srcroot)configure
./$(objroot)config.status --recheck
$(srcroot)config.stamp.in : $(srcroot)configure.ac
echo stamp > $(srcroot)config.stamp.in
$(objroot)config.stamp : $(cfgoutputs_in) $(cfghdrs_in) $(srcroot)configure
./$(objroot)config.status
@touch $@
# There must be some action in order for make to re-read Makefile when it is
# out of date.
$(cfgoutputs_out) $(cfghdrs_out) : $(objroot)config.stamp
@true
endif