The experimental `smallocx` API is not exposed via header files,
requiring the users to peek at `jemalloc`'s source code to manually
add the external declarations to their own programs.
This should reinforce that `smallocx` is experimental, and that `jemalloc`
does not offer any kind of backwards compatiblity or ABI gurantees for it.
- Make API more clear for using as standalone json emitter
- Support cases that weren't possible before, e.g.
- emitting primitive values in an array
- emitting nested arrays
The global data is mostly only used at initialization, or for easy access to
values we could compute statically. Instead of consuming that space (and
risking TLB misses), we can just pass around a pointer to stack data during
bootstrapping.
The largest small class, smallest large class, and largest large class may all
be needed down fast paths; to avoid the risk of touching another cache line, we
can make them available as constants.
This class removes almost all the dependencies on size_classes.h, accessing the
data there only via the new module sc.h, which does not depend on any
configuration options.
In a subsequent commit, we'll remove the configure-time size class computations,
doing them at boot time, instead.
Before this commit jemalloc produced many warnings when compiled with -Wextra
with both Clang and GCC. This commit fixes the issues raised by these warnings
or suppresses them if they were spurious at least for the Clang and GCC
versions covered by CI.
This commit:
* adds `JEMALLOC_DIAGNOSTIC` macros: `JEMALLOC_DIAGNOSTIC_{PUSH,POP}` are
used to modify the stack of enabled diagnostics. The
`JEMALLOC_DIAGNOSTIC_IGNORE_...` macros are used to ignore a concrete
diagnostic.
* adds `JEMALLOC_FALLTHROUGH` macro to explicitly state that falling
through `case` labels in a `switch` statement is intended
* Removes all UNUSED annotations on function parameters. The warning
-Wunused-parameter is now disabled globally in
`jemalloc_internal_macros.h` for all translation units that include
that header. It is never re-enabled since that header cannot be
included by users.
* locally suppresses some -Wextra diagnostics:
* `-Wmissing-field-initializer` is buggy in older Clang and GCC versions,
where it does not understanding that, in C, `= {0}` is a common C idiom
to initialize a struct to zero
* `-Wtype-bounds` is suppressed in a particular situation where a generic
macro, used in multiple different places, compares an unsigned integer for
smaller than zero, which is always true.
* `-Walloc-larger-than-size=` diagnostics warn when an allocation function is
called with a size that is too large (out-of-range). These are suppressed in
the parts of the tests where `jemalloc` explicitly does this to test that the
allocation functions fail properly.
* adds a new CI build bot that runs the log unit test on CI.
Closes#1196 .
The feature allows using a dedicated arena for huge allocations. We want the
addtional arena to separate huge allocation because: 1) mixing small extents
with huge ones causes fragmentation over the long run (this feature reduces VM
size significantly); 2) with many arenas, huge extents rarely get reused across
threads; and 3) huge allocations happen way less frequently, therefore no
concerns for lock contention.
Previously, we made the user deal with this themselves, but that's not good
enough; if hooks may allocate, we should test the allocation pathways down
hooks. If we're doing that, we might as well actually implement the protection
for the user.
The hook module allows a low-reader-overhead way of finding hooks to invoke and
calling them.
For now, none of the allocation pathways are tied into the hooks; this will come
later.
"Hooks" is really the best name for the module that will contain the publicly
exposed hooks. So lets rename the current "hooks" module (that hook external
dependencies, for reentrancy testing) to "test_hooks".
Looking at the thread counts in our services, jemalloc's background thread
is useful, but mostly idle. Add a config option to tune down the number of threads.
The emitter can be used to produce structured json or tabular output. For now
it has no uses; in subsequent commits, I'll begin transitioning stats printing
code over.
"always" marks all user mappings as MADV_HUGEPAGE; while "never" marks all
mappings as MADV_NOHUGEPAGE. The default setting "default" does not change any
settings. Note that all the madvise calls are part of the default extent hooks
by design, so that customized extent hooks have complete control over the
mappings including hugepage settings.
We have a buffer overrun that manifests in the case where arena indices higher
than the number of CPUs are accessed before arena indices lower than the number
of CPUs. This fixes the bug and adds a test.
When allocating from dirty extents (which we always prefer if available), large
active extents can get split even if the new allocation is much smaller, in
which case the introduced fragmentation causes high long term damage. This new
option controls the threshold to reuse and split an existing active extent. We
avoid using a large extent for much smaller sizes, in order to reduce
fragmentation. In some workload, adding the threshold improves virtual memory
usage by >10x.
This option controls the max size when grow_retained. This is useful when we
have customized extent hooks reserving physical memory (e.g. 1G huge pages).
Without this feature, the default increasing sequence could result in fragmented
and wasted physical memory.
To avoid the high RSS caused by THP + low usage arena (i.e. THP becomes a
significant percentage), added a new "auto" option which will only start using
THP after a base allocator used up the first THP region. Starting from the
second hugepage (in a single arena), "auto" behaves the same as "always",
i.e. madvise hugepage right away.
As part of the metadata_thp support, We now have a separate swtich
(JEMALLOC_HAVE_MADVISE_HUGE) for MADV_HUGEPAGE availability. Use that instead
of JEMALLOC_THP (which doesn't guard pages_huge anymore) in tests.
Currently we have to log by writing something like:
static log_var_t log_a_b_c = LOG_VAR_INIT("a.b.c");
log (log_a_b_c, "msg");
This is sort of annoying. Let's just write:
log("a.b.c", "msg");
Currently, the log macro requires at least one argument after the format string,
because of the way the preprocessor handles varargs macros. We can hide some of
that irritation by pushing the extra arguments into a varargs function.
Forking a multithreaded process is dangerous but allowed, so long as the child
only executes async-signal-safe functions (e.g. exec). Add a test to ensure
that we don't break this behavior.
Add testing for background_thread:true, and condition a xallocx() -->
rallocx() escalation assertion to allow for spurious in-place rallocx()
following xallocx() failure.
Added opt.background_thread to enable background threads, which handles purging
currently. When enabled, decay ticks will not trigger purging (which will be
left to the background threads). We limit the max number of threads to NCPUs.
When percpu arena is enabled, set CPU affinity for the background threads as
well.
The sleep interval of background threads is dynamic and determined by computing
number of pages to purge in the future (based on backlog).
Instead of embedding a lock bit in rtree leaf elements, we associate extents
with a small set of mutexes. This gets us two things:
- We can use the system mutexes. This (hypothetically) protects us from
priority inversion, and lets us stop doing a backoff/sleep loop, instead
opting for precise wakeups from the mutex.
- Cuts down on the number of mutex acquisitions we have to do (from 4 in the
worst case to two).
We end up simplifying most of the rtree code (which no longer has to deal with
locking or concurrency at all), at the cost of additional complexity in the
extent code: since the mutex protecting the rtree leaf elements is determined by
reading the extent out of those elements, the initial read is racy, so that we
may acquire an out of date mutex. We re-check the extent in the leaf after
acquiring the mutex to protect us from this race.
Support millisecond resolution for decay times. Among other use cases
this makes it possible to specify a short initial dirty-->muzzy decay
phase, followed by a longer muzzy-->clean decay phase.
This resolves#812.
This removes the tsd macros (which are used only for tsd_t in real builds). We
break up the circular dependencies involving tsd.
We also move all tsd access through getters and setters. This allows us to
assert that we only touch data when tsd is in a valid state.
We simplify the usages of the x macro trick, removing all the customizability
(get/set, init, cleanup), moving the lifetime logic to tsd_init and tsd_cleanup.
This lets us make initialization order independent of order within tsd_t.
Add the extent_destroy_t extent destruction hook to extent_hooks_t, and
use it during arena destruction. This hook explicitly communicates to
the callee that the extent must be destroyed or tracked for later reuse,
lest it be permanently leaked. Prior to this change, retained extents
could unintentionally be leaked if extent retention was enabled.
This resolves#560.
Control use of munmap(2) via a run-time option rather than a
compile-time option (with the same per platform default). The old
behavior of --disable-munmap can be achieved with
--with-malloc-conf=munmap:false.
This partially resolves#580.
Simplify configuration by removing the --disable-tcache option, but
replace the testing for that configuration with
--with-malloc-conf=tcache:false.
Fix the thread.arena and thread.tcache.flush mallctls to work correctly
if tcache is disabled.
This partially resolves#580.
All mappings continue to be PAGE-aligned, even if the system page size
is smaller. This change is primarily intended to provide a mechanism
for supporting multiple page sizes with the same binary; smaller page
sizes work better in conjunction with jemalloc's design.
This resolves#467.
Some systems use a native 64 KiB page size, which means that the bitmap
for the smallest size class can be 8192 bits, not just 512 bits as when
the page size is 4 KiB. Linear search in bitmap_{sfu,ffu}() is
unacceptably slow for such large bitmaps.
This reverts commit 7c00f04ff4.
With this change, when profiling is enabled, we avoid doing redundant rtree
lookups. Also changed dalloc_atx_t to alloc_atx_t, as it's now used on
allocation path as well (to speed up profiling).
This is a biggy. jemalloc_internal.h has been doing multiple jobs for a while
now:
- The source of system-wide definitions.
- The catch-all include file.
- The module header file for jemalloc.c
This commit splits up this functionality. The system-wide definitions
responsibility has moved to jemalloc_preamble.h. The catch-all include file is
now jemalloc_internal_includes.h. The module headers for jemalloc.c are now in
jemalloc_internal_[externs|inlines|types].h, just as they are for the other
modules.
This checks whether or not we're reentrant using thread-local data, and, if we
are, moves certain internal allocations to use arena 0 (which should be properly
initialized after bootstrapping).
The immediate thing this allows is spinning up threads in arena_new, which will
enable spinning up background threads there.
The embedded tcache is initialized upon tsd initialization. The avail arrays
for the tbins will be allocated / deallocated accordingly during init / cleanup.
With this change, the pointer to the auto tcache will always be available, as
long as we have access to the TSD. tcache_available() (called in tcache_get())
is provided to check if we should use tcache.
This will facilitate embedding tcache into tsd, which will require proper
initialization cannot be done via the static initializer. Make tsd->rtree_ctx
to be initialized via rtree_ctx_data_init().
Remove tree-structured bitmap support, in order to reduce complexity and
ease maintenance. No bitmaps larger than 512 bits have been necessary
since before 4.0.0, and there is no current plan that would increase
maximum bitmap size. Although tree-structured bitmaps were used on
32-bit platforms prior to this change, the overall benefits were
questionable (higher metadata overhead, higher bitmap modification cost,
marginally lower search cost).
This fixes an extent searching regression on 32-bit systems, caused by
the initial bitmap_ffu() implementation in
c8021d01f6 (Implement bitmap_ffu(), which
finds the first unset bit.), as first used in
5d33233a5e (Use a bitmap in extents_t to
speed up search.).
Expand and restructure the rtree API such that all common operations can
be achieved with minimal work, regardless of whether the rtree leaf
fields are independent versus packed into a single atomic pointer.
This allows leaf elements to differ in size from internal node elements.
In principle it would be more correct to use a different type for each
level of the tree, but due to implementation details related to atomic
operations, we use casts anyway, thus counteracting the value of
additional type correctness. Furthermore, such a scheme would require
function code generation (via cpp macros), as well as either unwieldy
type names for leaves or type aliases, e.g.
typedef struct rtree_elm_d2_s rtree_leaf_elm_t;
This alternate strategy would be more correct, and with less code
duplication, but probably not worth the complexity.
Rather than storing usize only for large (and prof-promoted)
allocations, store the size class index for allocations that reside
within the extent, such that the size class index is valid for all
extents that contain extant allocations, and invalid otherwise (mainly
to make debugging simpler).
Split decay-based purging into two phases, the first of which uses lazy
purging to convert dirty pages to "muzzy", and the second of which uses
forced purging, decommit, or unmapping to convert pages to clean or
destroy them altogether. Not all operating systems support lazy
purging, yet the application may provide extent hooks that implement
lazy purging, so care must be taken to dynamically omit the first phase
when necessary.
The mallctl interfaces change as follows:
- opt.decay_time --> opt.{dirty,muzzy}_decay_time
- arena.<i>.decay_time --> arena.<i>.{dirty,muzzy}_decay_time
- arenas.decay_time --> arenas.{dirty,muzzy}_decay_time
- stats.arenas.<i>.pdirty --> stats.arenas.<i>.p{dirty,muzzy}
- stats.arenas.<i>.{npurge,nmadvise,purged} -->
stats.arenas.<i>.{dirty,muzzy}_{npurge,nmadvise,purged}
This resolves#521.
The new feature, opt.percpu_arena, determines thread-arena association
dynamically based CPU id. Three modes are supported: "percpu", "phycpu"
and disabled.
"percpu" uses the current core id (with help from sched_getcpu())
directly as the arena index, while "phycpu" will assign threads on the
same physical CPU to the same arena. In other words, "percpu" means # of
arenas == # of CPUs, while "phycpu" has # of arenas == 1/2 * (# of
CPUs). Note that no runtime check on whether hyper threading is enabled
is added yet.
When enabled, threads will be migrated between arenas when a CPU change
is detected. In the current design, to reduce overhead from reading CPU
id, each arena tracks the thread accessed most recently. When a new
thread comes in, we will read CPU id and update arena if necessary.
When witness is enabled, lock rank order needs to be preserved during
prefork, not only for each arena, but also across arenas. This change
breaks arena_prefork into further stages to ensure valid rank order
across arenas. Also changed test/unit/fork to use a manual arena to
catch this case.
This fixes tcache_flush for manual tcaches, which wasn't able to find
the correct arena it associated with. Also changed the decay test to
cover this case (by using manually created arenas).
These functions select the easiest-to-remove element in the heap, which
is either the most recently inserted aux list element or the root. If
no calls are made to first() or remove_first(), the behavior (and time
complexity) is the same as for a LIFO queue.
Fix the test_decay_ticker test to carefully control slab
creation/destruction such that the decay backlog reliably reaches zero.
Use an isolated arena so that no extraneous allocation can confuse the
situation. Speed up time during the latter part of the test so that the
entire decay time can expire in a reasonable amount of wall time.
This is the first header refactoring diff, #533. It splits the assert and util
components into separate, hermetic, header files. In the process, it splits out
two of the large sub-components of util (the stdio.h replacement, and bit
manipulation routines) into their own components (malloc_io.h and bit_util.h).
This is mostly to break up cyclic dependencies, but it also breaks off a good
chunk of the catch-all-ness of util, which is nice.
This introduces a backport of C11 atomics. It has four implementations; ranked
in order of preference, they are:
- GCC/Clang __atomic builtins
- GCC/Clang __sync builtins
- MSVC _Interlocked builtins
- C11 atomics, from <stdatomic.h>
The primary advantages are:
- Close adherence to the standard API gives us a defined memory model.
- Type safety: atomic objects are now separate types from non-atomic ones, so
that it's impossible to mix up atomic and non-atomic updates (which is
undefined behavior that compilers are starting to take advantage of).
- Efficiency: we can specify ordering for operations, avoiding fences and
atomic operations on strongly ordered architectures (example:
`atomic_write_u32(ptr, val);` involves a CAS loop, whereas
`atomic_store(ptr, val, ATOMIC_RELEASE);` is a plain store.
This diff leaves in the current atomics API (implementing them in terms of the
backport). This lets us transition uses over piecemeal.
Testing:
This is by nature hard to test. I've manually tested the first three options on
Linux on gcc by futzing with the #defines manually, on freebsd with gcc and
clang, on MSVC, and on OS X with clang. All of these were x86 machines though,
and we don't have any test infrastructure set up for non-x86 platforms.
malloc_conf does not reliably work with MSVC, which complains of
"inconsistent dll linkage", i.e. its inability to support the
application overriding malloc_conf when dynamically linking/loading.
Work around this limitation by adding test harness support for per test
shell script sourcing, and converting all tests to use MALLOC_CONF
instead of malloc_conf.
Rather than dynamically building a table to aid per level computations,
define a constant table at compile time. Omit both high and low
insignificant bits. Use one to three tree levels, depending on the
number of significant bits.
Refactor arena and extent locking protocols such that arena and
extent locks are never held when calling into the extent_*_wrapper()
API. This requires extra care during purging since the arena lock no
longer protects the inner purging logic. It also requires extra care to
protect extents from being merged with adjacent extents.
Convert extent_t's 'active' flag to an enumerated 'state', so that
retained extents are explicitly marked as such, rather than depending on
ring linkage state.
Refactor the extent collections (and their synchronization) for cached
and retained extents into extents_t. Incorporate LRU functionality to
support purging. Incorporate page count accounting, which replaces
arena->ndirty and arena->stats.retained.
Assert that no core locks are held when entering any internal
[de]allocation functions. This is in addition to existing assertions
that no locks are held when entering external [de]allocation functions.
Audit and document synchronization protocols for all arena_t fields.
This fixes a potential deadlock due to recursive allocation during
gdump, in a similar fashion to b49c649bc1
(Fix lock order reversal during gdump.), but with a necessarily much
broader code impact.
Implement and test a JSON validation parser. Use the parser to validate
JSON output from malloc_stats_print(), with a significant subset of
supported output options.
This resolves#551.
Mostly revert the prof_realloc() changes in
498856f44a (Move slabs out of chunks.) so
that prof_free_sampled_object() is called when appropriate. Leave the
prof_tctx_[re]set() optimization in place, but add an assertion to
verify that all eight cases are correctly handled. Add a comment to
make clear the code ordering, so that the regression originally fixed by
ea8d97b897 (Fix
prof_{malloc,free}_sample_object() call order in prof_realloc().) is not
repeated.
This resolves#499.
This is part of a broader change to make header files better represent the
dependencies between one another (see
https://github.com/jemalloc/jemalloc/issues/533). It breaks up component headers
into smaller parts that can be made to have a simpler dependency graph.
For the autogenerated headers (smoothstep.h and size_classes.h), no splitting
was necessary, so I didn't add support to emit multiple headers.
Move test extent hook code from the extent integration test into a
header, and normalize the out-of-band controls and introspection.
Also refactor the base unit test to use the header.
Add the MALLCTL_ARENAS_ALL cpp macro as a fixed index for use
in accessing the arena.<i>.{purge,decay,dss} and stats.arenas.<i>.*
mallctls, and deprecate access via the arenas.narenas index (to be
removed in 6.0.0).
Add/rename related mallctls:
- Add stats.arenas.<i>.base .
- Rename stats.arenas.<i>.metadata to stats.arenas.<i>.internal .
- Add stats.arenas.<i>.resident .
Modify the arenas.extend mallctl to take an optional (extent_hooks_t *)
argument so that it is possible for all base allocations to be serviced
by the specified extent hooks.
This resolves#463.
Split purging into lazy and forced variants. Use the forced variant for
zeroing dss.
Add support for NULL function pointers as an opt-out mechanism for the
dalloc, commit, decommit, purge_lazy, purge_forced, split, and merge
fields of extent_hooks_t.
Add short-circuiting checks in large_ralloc_no_move_{shrink,expand}() so
that no attempt is made if splitting/merging is not supported.
This resolves#268.
Add the --with-lg-hugepage configure option, but automatically configure
LG_HUGEPAGE even if it isn't specified.
Add the pages_[no]huge() functions, which toggle huge page state via
madvise(..., MADV_[NO]HUGEPAGE) calls.
Rewrite arena_slab_regind() to provide sufficient constant data for
the compiler to perform division strength reduction. This replaces
more general manual strength reduction that was implemented before
arena_bin_info was compile-time-constant. It would be possible to
slightly improve on the compiler-generated division code by taking
advantage of range limits that the compiler doesn't know about.
Adds cpp bindings for jemalloc, along with necessary autoconf settings.
This is mostly to add sized deallocation support, which can't be added
from C directly. Sized deallocation is ~10% microbench improvement.
* Import ax_cxx_compile_stdcxx.m4 from the autoconf repo, seems like the
easiest way to get c++14 detection.
* Adds various other changes, like CXXFLAGS, to configure.ac.
* Adds new rules to Makefile.in for src/jemalloc-cpp.cpp, and a basic
unittest.
* Both new and delete are overridden, to ensure jemalloc is used for
both.
* TODO future enhancement of avoiding extra PLT thunks for new and
delete - sdallocx and malloc are publicly exported jemalloc symbols,
using an alias would link them directly. Unfortunately, was having
trouble getting it to play nice with jemalloc's namespace support.
Testing:
Tested gcc 4.8, gcc 5, gcc 5.2, clang 4.0. Only gcc >= 5 has sized
deallocation support, verified that the rest build correctly.
Tested mac osx and Centos.
Tested --with-jemalloc-prefix and --without-export.
This resolves#202.
Add an "over-size" extent heap in which to store extents which exceed
the maximum size class (plus cache-oblivious padding, if enabled).
Remove psz2ind_clamp() and use psz2ind() instead so that trying to
allocate the maximum size class can in principle succeed. In practice,
this allows assertions to hold so that OOM errors can be successfully
generated.
rtree_node_init spinlocks the node, allocates, and then sets the node.
This is under heavy contention at the top of the tree if many threads
start to allocate at the same time.
Instead, take a per-rtree sleeping mutex to reduce spinning. Tested
both pthreads and osx OSSpinLock, and both reduce spinning adequately
Previous benchmark time:
./ttest1 500 100
~15s
New benchmark time:
./ttest1 500 100
.57s
Rather than protecting dss operations with a mutex, use atomic
operations. This has negligible impact on synchronization overhead
during typical dss allocation, but is a substantial improvement for
extent_in_dss() and the newly added extent_dss_mergeable(), which can be
called multiple times during extent deallocations.
This change also has the advantage of avoiding tsd in deallocation paths
associated with purging, which resolves potential deadlocks during
thread exit due to attempted tsd resurrection.
This resolves#425.
Instead, move the epoch backward in time. Additionally, add
nstime_monotonic() and use it in debug builds to assert that time only
goes backward if nstime_update() is using a non-monotonic time source.
pgi fails to compile math.c, reporting that `-INFINITY` in `pt_norm_expected[]`
is a "Non-constant" expression. A simplified version of this failure is:
```c
#include <math.h>
static double inf1, inf2 = INFINITY; // no complaints
static double inf3 = INFINITY; // suddenly INFINITY is "Non-constant"
int main() { }
```
```sh
PGC-S-0074-Non-constant expression in initializer (t.c: 4)
```
pgi errors on the declaration of inf3, and will compile fine if that line is
removed. I've reported this bug to pgi, but in the meantime I just switched to
using (DBL_MAX + DBL_MAX) to work around this bug.
Fix a fundamental extent_split_wrapper() bug in an error path.
Fix extent_recycle() to deregister unsplittable extents before leaking
them.
Relax xallocx() test assertions so that unsplittable extents don't cause
test failures.
With the removal of subchunk size class infrastructure, there are no
large size classes that are guaranteed to be re-expandable in place
unless munmap() is disabled. Work around these legitimate failures with
rallocx() fallback calls. If there were no test configuration for which
the xallocx() calls succeeded, it would be important to override the
extent hooks for testing purposes, but by default these tests don't use
the rallocx() fallbacks on Linux, so test coverage is still sufficient.
