When junk filling is enabled, shrinking an allocation fills the bytes
that were previously allocated but now aren't. Purging the chunk before
doing that is just a waste of time.
This resolves#260.
Cascade from decommit to purge when purging unused dirty pages, so that
it is possible to decommit cleaned memory rather than just purging. For
non-Windows debug builds, decommit runs rather than purging them, since
this causes access of deallocated runs to segfault.
This resolves#251.
Add the "arena.<i>.chunk_hooks" mallctl, which replaces and expands on
the "arena.<i>.chunk.{alloc,dalloc,purge}" mallctls. The chunk hooks
allow control over chunk allocation/deallocation, decommit/commit,
purging, and splitting/merging, such that the application can rely on
jemalloc's internal chunk caching and retaining functionality, yet
implement a variety of chunk management mechanisms and policies.
Merge the chunks_[sz]ad_{mmap,dss} red-black trees into
chunks_[sz]ad_retained. This slightly reduces how hard jemalloc tries
to honor the dss precedence setting; prior to this change the precedence
setting was also consulted when recycling chunks.
Fix chunk purging. Don't purge chunks in arena_purge_stashed(); instead
deallocate them in arena_unstash_purged(), so that the dirty memory
linkage remains valid until after the last time it is used.
This resolves#176 and #201.
Fix huge_ralloc_no_move() to succeed if an allocation request results in
the same usable size as the existing allocation, even if the request
size is smaller than the usable size. This bug did not cause
correctness issues, but it could cause unnecessary moves during
reallocation.
Fix size class overflow handling for malloc(), posix_memalign(),
memalign(), calloc(), and realloc() when profiling is enabled.
Remove an assertion that erroneously caused arena_sdalloc() to fail when
profiling was enabled.
This resolves#232.
Add mallctls:
- arenas.lg_dirty_mult is initialized via opt.lg_dirty_mult, and can be
modified to change the initial lg_dirty_mult setting for newly created
arenas.
- arena.<i>.lg_dirty_mult controls an individual arena's dirty page
purging threshold, and synchronously triggers any purging that may be
necessary to maintain the constraint.
- arena.<i>.chunk.purge allows the per arena dirty page purging function
to be replaced.
This resolves#93.
This regression was introduced by
88fef7ceda (Refactor huge_*() calls into
arena internals.), and went undetected because of the --enable-debug
regression.
This adds support for expanding huge allocations in-place by requesting
memory at a specific address from the chunk allocator.
It's currently only implemented for the chunk recycling path, although
in theory it could also be done by optimistically allocating new chunks.
On Linux, it could attempt an in-place mremap. However, that won't work
in practice since the heap is grown downwards and memory is not unmapped
(in a normal build, at least).
Repeated vector reallocation micro-benchmark:
#include <string.h>
#include <stdlib.h>
int main(void) {
for (size_t i = 0; i < 100; i++) {
void *ptr = NULL;
size_t old_size = 0;
for (size_t size = 4; size < (1 << 30); size *= 2) {
ptr = realloc(ptr, size);
if (!ptr) return 1;
memset(ptr + old_size, 0xff, size - old_size);
old_size = size;
}
free(ptr);
}
}
The glibc allocator fails to do any in-place reallocations on this
benchmark once it passes the M_MMAP_THRESHOLD (default 128k) but it
elides the cost of copies via mremap, which is currently not something
that jemalloc can use.
With this improvement, jemalloc still fails to do any in-place huge
reallocations for the first outer loop, but then succeeds 100% of the
time for the remaining 99 iterations. The time spent doing allocations
and copies drops down to under 5%, with nearly all of it spent doing
purging + faulting (when huge pages are disabled) and the array memset.
An improved mremap API (MREMAP_RETAIN - #138) would be far more general
but this is a portable optimization and would still be useful on Linux
for xallocx.
Numbers with transparent huge pages enabled:
glibc (copies elided via MREMAP_MAYMOVE): 8.471s
jemalloc: 17.816s
jemalloc + no-op madvise: 13.236s
jemalloc + this commit: 6.787s
jemalloc + this commit + no-op madvise: 6.144s
Numbers with transparent huge pages disabled:
glibc (copies elided via MREMAP_MAYMOVE): 15.403s
jemalloc: 39.456s
jemalloc + no-op madvise: 12.768s
jemalloc + this commit: 15.534s
jemalloc + this commit + no-op madvise: 6.354s
Closes#137
This adds a new `sdallocx` function to the external API, allowing the
size to be passed by the caller. It avoids some extra reads in the
thread cache fast path. In the case where stats are enabled, this
avoids the work of calculating the size from the pointer.
An assertion validates the size that's passed in, so enabling debugging
will allow users of the API to debug cases where an incorrect size is
passed in.
The performance win for a contrived microbenchmark doing an allocation
and immediately freeing it is ~10%. It may have a different impact on a
real workload.
Closes#28
Refactor huge allocation to be managed by arenas (though the global
red-black tree of huge allocations remains for lookup during
deallocation). This is the logical conclusion of recent changes that 1)
made per arena dss precedence apply to huge allocation, and 2) made it
possible to replace the per arena chunk allocation/deallocation
functions.
Remove the top level huge stats, and replace them with per arena huge
stats.
Normalize function names and types to *dalloc* (some were *dealloc*).
Remove the --enable-mremap option. As jemalloc currently operates, this
is a performace regression for some applications, but planned work to
logarithmically space huge size classes should provide similar amortized
performance. The motivation for this change was that mremap-based huge
reallocation forced leaky abstractions that prevented refactoring.
Add new mallctl endpoints "arena<i>.chunk.alloc" and
"arena<i>.chunk.dealloc" to allow userspace to configure
jemalloc's chunk allocator and deallocator on a per-arena
basis.
Make dss non-optional on all platforms which support sbrk(2).
Fix the "arena.<i>.dss" mallctl to return an error if "primary" or
"secondary" precedence is specified, but sbrk(2) is not supported.
Reduce maximum tested alignment from 2^29 to 2^25. Some systems may not
have enough contiguous virtual memory to satisfy the larger alignment,
but the smaller alignment is still adequate to test multi-chunk
alignment.
Remove the allocm() test equivalent to the mallocx() test removed in the
previous commit. The flawed test attempted to cause OOM due to large
request size and alignment constraint. Although this test "passed" on
64-bit systems due to the virtual memory hole, it could pass on some
32-bit systems.
Fix/remove three related flawed tests that attempted to cause OOM due to
large request size and alignment constraint. Although these tests
"passed" on 64-bit systems due to the virtual memory hole, they could
pass on some 32-bit systems.
Extract profiling code from malloc(), imemalign(), calloc(), realloc(),
mallocx(), rallocx(), and xallocx(). This slightly reduces the amount
of code compiled into the fast paths, but the primary benefit is the
combinatorial complexity reduction.
Simplify iralloc[t]() by creating a separate ixalloc() that handles the
no-move cases.
Further simplify [mrxn]allocx() (and by implication [mrn]allocm()) to
make request size overflows due to size class and/or alignment
constraints trigger undefined behavior (detected by debug-only
assertions).
Report ENOMEM rather than EINVAL if an OOM occurs during heap profiling
backtrace creation in imemalign(). This bug impacted posix_memalign()
and aligned_alloc().
Implement the *allocx() API, which is a successor to the *allocm() API.
The *allocx() functions are slightly simpler to use because they have
fewer parameters, they directly return the results of primary interest,
and mallocx()/rallocx() avoid the strict aliasing pitfall that
allocm()/rallocx() share with posix_memalign(). The following code
violates strict aliasing rules:
foo_t *foo;
allocm((void **)&foo, NULL, 42, 0);
whereas the following is safe:
foo_t *foo;
void *p;
allocm(&p, NULL, 42, 0);
foo = (foo_t *)p;
mallocx() does not have this problem:
foo_t *foo = (foo_t *)mallocx(42, 0);
Add mtx (mutex) to test infrastructure, in order to avoid bootstrapping
complications that would result from directly using malloc_mutex.
Rename test infrastructure's thread abstraction from je_thread to thd.
Fix some header ordering issues.
Refactor tests to use explicit testing assertions, rather than diff'ing
test output. This makes the test code a bit shorter, more explicitly
encodes testing intent, and makes test failure diagnosis more
straightforward.
Refactor the test harness to support three types of tests:
- unit: White box unit tests. These tests have full access to all
internal jemalloc library symbols. Though in actuality all symbols
are prefixed by jet_, macro-based name mangling abstracts this away
from test code.
- integration: Black box integration tests. These tests link with
the installable shared jemalloc library, and with the exception of
some utility code and configure-generated macro definitions, they have
no access to jemalloc internals.
- stress: Black box stress tests. These tests link with the installable
shared jemalloc library, as well as with an internal allocator with
symbols prefixed by jet_ (same as for unit tests) that can be used to
allocate data structures that are internal to the test code.
Move existing tests into test/{unit,integration}/ as appropriate.
Split out internal parts of jemalloc_defs.h.in and put them in
jemalloc_internal_defs.h.in. This reduces internals exposure to
applications that #include <jemalloc/jemalloc.h>.
Refactor jemalloc.h header generation so that a single header file
results, and the prototypes can be used to generate jet_ prototypes for
tests. Split jemalloc.h.in into multiple parts (jemalloc_defs.h.in,
jemalloc_macros.h.in, jemalloc_protos.h.in, jemalloc_mangle.h.in) and
use a shell script to generate a unified jemalloc.h at configure time.
Change the default private namespace prefix from "" to "je_".
Add missing private namespace mangling.
Remove hard-coded private_namespace.h. Instead generate it and
private_unnamespace.h from private_symbols.txt. Use similar logic for
public symbols, which aids in name mangling for jet_ symbols.
Add test_warn() and test_fail(). Replace existing exit(1) calls with
test_fail() calls.
