Added opt.background_thread to enable background threads, which handles purging
currently. When enabled, decay ticks will not trigger purging (which will be
left to the background threads). We limit the max number of threads to NCPUs.
When percpu arena is enabled, set CPU affinity for the background threads as
well.
The sleep interval of background threads is dynamic and determined by computing
number of pages to purge in the future (based on backlog).
Instead of embedding a lock bit in rtree leaf elements, we associate extents
with a small set of mutexes. This gets us two things:
- We can use the system mutexes. This (hypothetically) protects us from
priority inversion, and lets us stop doing a backoff/sleep loop, instead
opting for precise wakeups from the mutex.
- Cuts down on the number of mutex acquisitions we have to do (from 4 in the
worst case to two).
We end up simplifying most of the rtree code (which no longer has to deal with
locking or concurrency at all), at the cost of additional complexity in the
extent code: since the mutex protecting the rtree leaf elements is determined by
reading the extent out of those elements, the initial read is racy, so that we
may acquire an out of date mutex. We re-check the extent in the leaf after
acquiring the mutex to protect us from this race.
Support millisecond resolution for decay times. Among other use cases
this makes it possible to specify a short initial dirty-->muzzy decay
phase, followed by a longer muzzy-->clean decay phase.
This resolves#812.
Rather than using a manually maintained list of internal symbols to
drive name mangling, add a compilation phase to automatically extract
the list of internal symbols.
This resolves#677.
Split decay-based purging into two phases, the first of which uses lazy
purging to convert dirty pages to "muzzy", and the second of which uses
forced purging, decommit, or unmapping to convert pages to clean or
destroy them altogether. Not all operating systems support lazy
purging, yet the application may provide extent hooks that implement
lazy purging, so care must be taken to dynamically omit the first phase
when necessary.
The mallctl interfaces change as follows:
- opt.decay_time --> opt.{dirty,muzzy}_decay_time
- arena.<i>.decay_time --> arena.<i>.{dirty,muzzy}_decay_time
- arenas.decay_time --> arenas.{dirty,muzzy}_decay_time
- stats.arenas.<i>.pdirty --> stats.arenas.<i>.p{dirty,muzzy}
- stats.arenas.<i>.{npurge,nmadvise,purged} -->
stats.arenas.<i>.{dirty,muzzy}_{npurge,nmadvise,purged}
This resolves#521.
This is the first header refactoring diff, #533. It splits the assert and util
components into separate, hermetic, header files. In the process, it splits out
two of the large sub-components of util (the stdio.h replacement, and bit
manipulation routines) into their own components (malloc_io.h and bit_util.h).
This is mostly to break up cyclic dependencies, but it also breaks off a good
chunk of the catch-all-ness of util, which is nice.
This introduces a backport of C11 atomics. It has four implementations; ranked
in order of preference, they are:
- GCC/Clang __atomic builtins
- GCC/Clang __sync builtins
- MSVC _Interlocked builtins
- C11 atomics, from <stdatomic.h>
The primary advantages are:
- Close adherence to the standard API gives us a defined memory model.
- Type safety: atomic objects are now separate types from non-atomic ones, so
that it's impossible to mix up atomic and non-atomic updates (which is
undefined behavior that compilers are starting to take advantage of).
- Efficiency: we can specify ordering for operations, avoiding fences and
atomic operations on strongly ordered architectures (example:
`atomic_write_u32(ptr, val);` involves a CAS loop, whereas
`atomic_store(ptr, val, ATOMIC_RELEASE);` is a plain store.
This diff leaves in the current atomics API (implementing them in terms of the
backport). This lets us transition uses over piecemeal.
Testing:
This is by nature hard to test. I've manually tested the first three options on
Linux on gcc by futzing with the #defines manually, on freebsd with gcc and
clang, on MSVC, and on OS X with clang. All of these were x86 machines though,
and we don't have any test infrastructure set up for non-x86 platforms.
Implement and test a JSON validation parser. Use the parser to validate
JSON output from malloc_stats_print(), with a significant subset of
supported output options.
This resolves#551.
Mostly revert the prof_realloc() changes in
498856f44a (Move slabs out of chunks.) so
that prof_free_sampled_object() is called when appropriate. Leave the
prof_tctx_[re]set() optimization in place, but add an assertion to
verify that all eight cases are correctly handled. Add a comment to
make clear the code ordering, so that the regression originally fixed by
ea8d97b897 (Fix
prof_{malloc,free}_sample_object() call order in prof_realloc().) is not
repeated.
This resolves#499.
Add/rename related mallctls:
- Add stats.arenas.<i>.base .
- Rename stats.arenas.<i>.metadata to stats.arenas.<i>.internal .
- Add stats.arenas.<i>.resident .
Modify the arenas.extend mallctl to take an optional (extent_hooks_t *)
argument so that it is possible for all base allocations to be serviced
by the specified extent hooks.
This resolves#463.
Add the --with-lg-hugepage configure option, but automatically configure
LG_HUGEPAGE even if it isn't specified.
Add the pages_[no]huge() functions, which toggle huge page state via
madvise(..., MADV_[NO]HUGEPAGE) calls.
Rewrite arena_slab_regind() to provide sufficient constant data for
the compiler to perform division strength reduction. This replaces
more general manual strength reduction that was implemented before
arena_bin_info was compile-time-constant. It would be possible to
slightly improve on the compiler-generated division code by taking
advantage of range limits that the compiler doesn't know about.
Convert CFLAGS/CXXFLAGS to be concatenations:
CFLAGS := CONFIGURE_CFLAGS SPECIFIED_CFLAGS EXTRA_CFLAGS
CXXFLAGS := CONFIGURE_CXXFLAGS SPECIFIED_CXXFLAGS EXTRA_CXXFLAGS
This ordering makes it possible to override the flags set by the
configure script both during and after configuration, with
CFLAGS/CXXFLAGS and EXTRA_CFLAGS/EXTRA_CXXFLAGS, respectively.
This resolves#504.
Adds cpp bindings for jemalloc, along with necessary autoconf settings.
This is mostly to add sized deallocation support, which can't be added
from C directly. Sized deallocation is ~10% microbench improvement.
* Import ax_cxx_compile_stdcxx.m4 from the autoconf repo, seems like the
easiest way to get c++14 detection.
* Adds various other changes, like CXXFLAGS, to configure.ac.
* Adds new rules to Makefile.in for src/jemalloc-cpp.cpp, and a basic
unittest.
* Both new and delete are overridden, to ensure jemalloc is used for
both.
* TODO future enhancement of avoiding extra PLT thunks for new and
delete - sdallocx and malloc are publicly exported jemalloc symbols,
using an alias would link them directly. Unfortunately, was having
trouble getting it to play nice with jemalloc's namespace support.
Testing:
Tested gcc 4.8, gcc 5, gcc 5.2, clang 4.0. Only gcc >= 5 has sized
deallocation support, verified that the rest build correctly.
Tested mac osx and Centos.
Tested --with-jemalloc-prefix and --without-export.
This resolves#202.
Conditionalize use of --whole-archive on the platform plus compiler,
rather than on the ABI. This fixes a regression caused by
7b24c6e557 (Use --whole-archive when
linking integration tests on MinGW.).
Prior to this change, the malloc_conf weak symbol provided by the
jemalloc dynamic library is always used, even if the application
provides a malloc_conf symbol. Use the --whole-archive linker option
to allow the weak symbol to be overridden.
Add spin_t and spin_{init,adaptive}(), which provide a simple
abstraction for adaptive spinning.
Adaptively spin during busy waits in bootstrapping and rtree node
initialization.
The Cray compiler wrappers will often add `-lrt` to the base compiler with
`-static` linking (the default at most sites.) However, `-lrt` isn't
automatically added with `-dynamic`. This means that if jemalloc was built with
`-static`, but then used in a program with `-dynamic` jemalloc won't have
detected that librt is a dependency.
The integration and stress tests use -dynamic, which is causing undefined
references to clock_gettime().
This just adds an extra check for librt (ignoring the autoconf cache) with
`-dynamic` thrown. It also stops filtering librt from the integration tests.
With this `make check` passes for:
- PrgEnv-gnu
- PrgEnv-intel
- PrgEnv-pgi
PrgEnv-cray still needs more work (will be in a separate patch.)
Cray systems come with compiler wrappers to simplify building parallel
applications. CC is the C++ wrapper, and cc is the C wrapper.
The wrappers call the base {Cray, Intel, PGI, or GNU} compiler with vendor
specific flags. The "Programming Environment" (prgenv) that's currently loaded
determines the base compiler. e.g. compiling with gnu looks something like:
module load PrgEnv-gnu
cc hello.c
On most systems the wrappers defaults to `-static` mode, which causes them to
only look for static libraries, and not for any dynamic ones (even if the
dynamic version was explicitly listed.)
The integration and stress tests expect to be using the .so, so we have to run
the with -dynamic so that wrapper will find/use the .so.
Refactor ph to support configurable comparison functions. Use a cpp
macro code generation form equivalent to the rb macros so that pairing
heaps can be used for both run heaps and chunk heaps.
Remove per node parent pointers, and instead use leftmost siblings' prev
pointers to track parents.
Fix multi-pass sibling merging to iterate over intermediate results
using a FIFO, rather than a LIFO. Use this fixed sibling merging
implementation for both merge phases of the auxiliary twopass algorithm
(first merging the aux list, then replacing the root with its merged
children). This fixes both degenerate merge behavior and the potential
for deep recursion.
This regression was introduced by
6bafa6678f (Pairing heap).
This resolves#371.
Initial implementation of a twopass pairing heap with aux list.
Research papers linked in comments.
Where search/nsearch/last aren't needed, this gives much faster first(),
delete(), and insert(). Insert is O(1), and first/delete don't have to
walk the whole tree.
Also tested rb_old with parent pointers - it was better than the current
rb.h for memory loads, but still much worse than a pairing heap.
An array-based heap would be much faster if everything fits in memory,
but on a cold cache it has many more memory loads for most operations.
Use a single uint64_t in nstime_t to store nanoseconds rather than using
struct timespec. This reduces fragility around conversions between long
and uint64_t, especially missing casts that only cause problems on
32-bit platforms.
