This class removes almost all the dependencies on size_classes.h, accessing the
data there only via the new module sc.h, which does not depend on any
configuration options.
In a subsequent commit, we'll remove the configure-time size class computations,
doing them at boot time, instead.
Before this commit jemalloc produced many warnings when compiled with -Wextra
with both Clang and GCC. This commit fixes the issues raised by these warnings
or suppresses them if they were spurious at least for the Clang and GCC
versions covered by CI.
This commit:
* adds `JEMALLOC_DIAGNOSTIC` macros: `JEMALLOC_DIAGNOSTIC_{PUSH,POP}` are
used to modify the stack of enabled diagnostics. The
`JEMALLOC_DIAGNOSTIC_IGNORE_...` macros are used to ignore a concrete
diagnostic.
* adds `JEMALLOC_FALLTHROUGH` macro to explicitly state that falling
through `case` labels in a `switch` statement is intended
* Removes all UNUSED annotations on function parameters. The warning
-Wunused-parameter is now disabled globally in
`jemalloc_internal_macros.h` for all translation units that include
that header. It is never re-enabled since that header cannot be
included by users.
* locally suppresses some -Wextra diagnostics:
* `-Wmissing-field-initializer` is buggy in older Clang and GCC versions,
where it does not understanding that, in C, `= {0}` is a common C idiom
to initialize a struct to zero
* `-Wtype-bounds` is suppressed in a particular situation where a generic
macro, used in multiple different places, compares an unsigned integer for
smaller than zero, which is always true.
* `-Walloc-larger-than-size=` diagnostics warn when an allocation function is
called with a size that is too large (out-of-range). These are suppressed in
the parts of the tests where `jemalloc` explicitly does this to test that the
allocation functions fail properly.
* adds a new CI build bot that runs the log unit test on CI.
Closes#1196 .
The feature allows using a dedicated arena for huge allocations. We want the
addtional arena to separate huge allocation because: 1) mixing small extents
with huge ones causes fragmentation over the long run (this feature reduces VM
size significantly); 2) with many arenas, huge extents rarely get reused across
threads; and 3) huge allocations happen way less frequently, therefore no
concerns for lock contention.
Previously, we made the user deal with this themselves, but that's not good
enough; if hooks may allocate, we should test the allocation pathways down
hooks. If we're doing that, we might as well actually implement the protection
for the user.
The hook module allows a low-reader-overhead way of finding hooks to invoke and
calling them.
For now, none of the allocation pathways are tied into the hooks; this will come
later.
"Hooks" is really the best name for the module that will contain the publicly
exposed hooks. So lets rename the current "hooks" module (that hook external
dependencies, for reentrancy testing) to "test_hooks".
We're about to need an atomic uint8_t for state operations.
Unfortunately, we're at the point where things won't get inlined into the key
methods unless they're force-inlined. This is embarassing and we should do
something about it, but in the meantime we'll force-inline a little more when we
need to.
Looking at the thread counts in our services, jemalloc's background thread
is useful, but mostly idle. Add a config option to tune down the number of threads.
szind and slab bits are read on fast path, where compiler generated two memory
loads separately for them before this diff. Manually operate on the bits to
avoid the extra memory load.
The emitter can be used to produce structured json or tabular output. For now
it has no uses; in subsequent commits, I'll begin transitioning stats printing
code over.
"always" marks all user mappings as MADV_HUGEPAGE; while "never" marks all
mappings as MADV_NOHUGEPAGE. The default setting "default" does not change any
settings. Note that all the madvise calls are part of the default extent hooks
by design, so that customized extent hooks have complete control over the
mappings including hugepage settings.
On glibc and Android's bionic, strerror_r returns char* when
_GNU_SOURCE is defined.
Add a configure check for this rather than assume glibc is the
only libc that behaves this way.
The arena-associated stats are now all prefixed with arena_stats_, and live in
their own file. Likewise, malloc_bin_stats_t -> bin_stats_t, also in its own
file.
When purging, large allocations are usually the ones that cross the npages_limit
threshold, simply because they are "large". This means we often leave the large
extent around for a while, which has the downsides of: 1) high RSS and 2) more
chance of them getting fragmented. Given that they are not likely to be reused
very soon (LRU), let's over purge by 1 extent (which is often large and not
reused frequently).
When allocating from dirty extents (which we always prefer if available), large
active extents can get split even if the new allocation is much smaller, in
which case the introduced fragmentation causes high long term damage. This new
option controls the threshold to reuse and split an existing active extent. We
avoid using a large extent for much smaller sizes, in order to reduce
fragmentation. In some workload, adding the threshold improves virtual memory
usage by >10x.
While working on #852, I noticed the prng state is atomic. This is the only
atomic use of prng in all of jemalloc. Instead, use a threadlocal prng
state if possible to avoid unnecessary cache line contention.
Added an upper bound on how many pages we can decay during the current run.
Without this, decay could have unbounded increase in stashed, since other
threads could add new pages into the extents.
This option controls the max size when grow_retained. This is useful when we
have customized extent hooks reserving physical memory (e.g. 1G huge pages).
Without this feature, the default increasing sequence could result in fragmented
and wasted physical memory.
We observed that arena 0 can have much more metadata allocated comparing to
other arenas. Tune the auto mode to only switch to huge page on the 5th block
(instead of 3 previously) for a0.
On x86 Linux, we define our own MADV_FREE if madvise(2) is available, but no
MADV_FREE is detected. This allows the feature to be built in and enabled with
runtime detection.
Quoting from https://github.com/jemalloc/jemalloc/issues/761 :
[...] reading the Power ISA documentation[1], the assembly in [the CPU_SPINWAIT
macro] isn't correct anyway (as @marxin points out): the setting of the
program-priority register is "sticky", and we never undo the lowering.
We could do something similar, but given that we don't have testing here in the
first place, I'm inclined to simply not try. I'll put something up reverting the
problematic commit tomorrow.
[1] Book II, chapter 3 of the 2.07B or 3.0B ISA documents.
There does not seem to be any overlap between usage of
extent_avail and extent_heap, so we can use the same hook.
The only remaining usage of rb trees is in the profiling code,
which has some 'interesting' iteration constraints.
Fixes#888
In userspace ARM on Linux, zero-ing the high bits is the correct way to do this.
This doesn't fix the fact that we currently set LG_VADDR to 48 on ARM, when in
fact larger virtual address sizes are coming soon. We'll cross that bridge when
we come to it.
If we guarantee no malloc activity in extent hooks, it's possible to make
customized hooks working on arena 0. Remove the non-a0 assertion to enable such
use cases.
To avoid the high RSS caused by THP + low usage arena (i.e. THP becomes a
significant percentage), added a new "auto" option which will only start using
THP after a base allocator used up the first THP region. Starting from the
second hugepage (in a single arena), "auto" behaves the same as "always",
i.e. madvise hugepage right away.
This eliminates the need for the arena stats code to "know" about tcaches; all
that it needs is a cache_bin_array_descriptor_t to tell it where to find
cache_bins whose stats it should aggregate.
This is the first step towards breaking up the tcache and arena (since they
interact primarily at the bin level). It should also make a future arena
caching implementation more straightforward.
As part of the metadata_thp support, We now have a separate swtich
(JEMALLOC_HAVE_MADVISE_HUGE) for MADV_HUGEPAGE availability. Use that instead
of JEMALLOC_THP (which doesn't guard pages_huge anymore) in tests.
The external linkage for spin_adaptive was not used, and the inline
declaration of spin_adaptive that was used caused a probem on FreeBSD
where CPU_SPINWAIT is implemented as a call to a static procedure for
x86 architectures.
Currently we have to log by writing something like:
static log_var_t log_a_b_c = LOG_VAR_INIT("a.b.c");
log (log_a_b_c, "msg");
This is sort of annoying. Let's just write:
log("a.b.c", "msg");
Currently, the log macro requires at least one argument after the format string,
because of the way the preprocessor handles varargs macros. We can hide some of
that irritation by pushing the extra arguments into a varargs function.
Passing is_background_thread down the decay path, so that background thread
itself won't attempt inactivity_check. This fixes an issue with background
thread doing trylock on a mutex it already owns.
We use the minimal_initilized tsd (which requires no cleanup) for free()
specifically, if tsd hasn't been initialized yet.
Any other activity will transit the state from minimal to normal. This is to
workaround the case where a thread has no malloc calls in its lifetime until
during thread termination, free() happens after tls destructors.
To avoid complications, avoid invoking pthread_create "internally", instead rely
on thread0 to launch new threads, and also terminating threads when asked.
Avoid holding arenas_lock and background_thread_lock when creating background
threads, because pthread_create may take internal locks, and potentially cause
deadlock with jemalloc internal locks.
Fix management of extent_grow_next to serialize operations that may grow
retained memory. This assures that the sizes of the newly allocated
extents correspond to the size classes in the intended growth sequence.
Fix management of extent_grow_next to skip size classes if a request is
too large to be satisfied by the next size in the growth sequence. This
avoids the potential for an arbitrary number of requests to bypass
triggering extent_grow_next increases.
This resolves#858.
When # of dirty pages move below npages_limit (e.g. they are reused), we should
not lower number of unpurged pages because that would cause the reused pages to
be double counted in the backlog (as a result, decay happen slower than it
should). Instead, set number of unpurged to the greater of current npages and
npages_limit.
Added an assertion: the ceiling # of pages should be greater than npages_limit.
To avoid background threads sleeping forever with idle arenas, we eagerly check
background threads' sleep time after extents_dalloc, and signal the thread if
necessary.
Added opt.background_thread to enable background threads, which handles purging
currently. When enabled, decay ticks will not trigger purging (which will be
left to the background threads). We limit the max number of threads to NCPUs.
When percpu arena is enabled, set CPU affinity for the background threads as
well.
The sleep interval of background threads is dynamic and determined by computing
number of pages to purge in the future (based on backlog).
Instead of embedding a lock bit in rtree leaf elements, we associate extents
with a small set of mutexes. This gets us two things:
- We can use the system mutexes. This (hypothetically) protects us from
priority inversion, and lets us stop doing a backoff/sleep loop, instead
opting for precise wakeups from the mutex.
- Cuts down on the number of mutex acquisitions we have to do (from 4 in the
worst case to two).
We end up simplifying most of the rtree code (which no longer has to deal with
locking or concurrency at all), at the cost of additional complexity in the
extent code: since the mutex protecting the rtree leaf elements is determined by
reading the extent out of those elements, the initial read is racy, so that we
may acquire an out of date mutex. We re-check the extent in the leaf after
acquiring the mutex to protect us from this race.
This lets us specify whether and how mutexes of the same rank are allowed to be
acquired. Currently, we only allow two polices (only a single mutex at a given
rank at a time, and mutexes acquired in ascending order), but we can plausibly
allow more (e.g. the "release uncontended mutexes before blocking").
Support millisecond resolution for decay times. Among other use cases
this makes it possible to specify a short initial dirty-->muzzy decay
phase, followed by a longer muzzy-->clean decay phase.
This resolves#812.
Rather than using a manually maintained list of internal symbols to
drive name mangling, add a compilation phase to automatically extract
the list of internal symbols.
This resolves#677.
Instead, always define function pointers for interceptable functions,
but mark them const unless testing, so that the compiler can optimize
out the pointer dereferences.
Redeclaration causes compilations failures with e.g. gcc 4.2.1 on
FreeBSD. This regression was introduced by
89e2d3c12b (Header refactoring: ctl -
unify and remove from catchall.).
Re-read the leaf element when atomic CAS fails due to a race with
another thread that has locked the leaf element, since
atomic_compare_exchange_strong_p() overwrites the expected value with
the actual value on failure. This regression was introduced by
0ee0e0c155 (Implement compact rtree leaf
element representation.).
This resolves#798.
Refactor rtree_leaf_elm_extent_write() as
rtree_leaf_elm_extent_lock_write(), so that whether the leaf element is
currently acquired is separate from what lock state to write. This
allows for a relaxed atomic read when releasing the lock.
This removes the tsd macros (which are used only for tsd_t in real builds). We
break up the circular dependencies involving tsd.
We also move all tsd access through getters and setters. This allows us to
assert that we only touch data when tsd is in a valid state.
We simplify the usages of the x macro trick, removing all the customizability
(get/set, init, cleanup), moving the lifetime logic to tsd_init and tsd_cleanup.
This lets us make initialization order independent of order within tsd_t.
Add the extent_destroy_t extent destruction hook to extent_hooks_t, and
use it during arena destruction. This hook explicitly communicates to
the callee that the extent must be destroyed or tracked for later reuse,
lest it be permanently leaked. Prior to this change, retained extents
could unintentionally be leaked if extent retention was enabled.
This resolves#560.
This reverts commit b0c2a28280. Production
benchmark shows this caused significant regression in both CPU and memory
consumption. Will investigate separately later on.
Control use of munmap(2) via a run-time option rather than a
compile-time option (with the same per platform default). The old
behavior of --disable-munmap can be achieved with
--with-malloc-conf=munmap:false.
This partially resolves#580.
The explicit compiler warning suppression controlled by this option is
universally desirable, so remove the ability to disable suppression.
This partially resolves#580.
This can catch bugs in which one header defines a numeric constant, and another
uses it without including the defining header. Undefined preprocessor symbols
expand to '0', so that this will compile fine, silently doing the math wrong.
Continue to use ivsalloc() when --enable-debug is specified (and add
assertions to guard against 0 size), but stop providing a documented
explicit semantics-changing band-aid to dodge undefined behavior in
sallocx() and malloc_usable_size(). ivsalloc() remains compiled in,
unlike when #211 restored --enable-ivsalloc, and if
JEMALLOC_FORCE_IVSALLOC is defined during compilation, sallocx() and
malloc_usable_size() will still use ivsalloc().
This partially resolves#580.
Some architectures like AArch64 may not have the open syscall because it
was superseded by the openat syscall, so check and use SYS_openat if
SYS_open is not available.
Additionally, Android headers for AArch64 define SYS_open to __NR_open,
even though __NR_open is undefined. Undefine SYS_open in that case so
SYS_openat is used.
Simplify configuration by removing the --disable-tcache option, but
replace the testing for that configuration with
--with-malloc-conf=tcache:false.
Fix the thread.arena and thread.tcache.flush mallctls to work correctly
if tcache is disabled.
This partially resolves#580.
Tracking extents is required by arena_reset. To support this, the extent
linkage was used for tracking 1) large allocations, and 2) full slabs. However
modifying the extent linkage could be an expensive operation as it likely incurs
cache misses. Since we forbid arena_reset on auto arenas, let's bypass the
linkage operations for auto arenas.
All mappings continue to be PAGE-aligned, even if the system page size
is smaller. This change is primarily intended to provide a mechanism
for supporting multiple page sizes with the same binary; smaller page
sizes work better in conjunction with jemalloc's design.
This resolves#467.
Some systems use a native 64 KiB page size, which means that the bitmap
for the smallest size class can be 8192 bits, not just 512 bits as when
the page size is 4 KiB. Linear search in bitmap_{sfu,ffu}() is
unacceptably slow for such large bitmaps.
This reverts commit 7c00f04ff4.
Rather than using a LIFO queue to track available extent_t structures,
use a red-black tree, and always choose the oldest/lowest available
during reuse.
Two levels of rcache is implemented: a direct mapped cache as L1, combined with
a LRU cache as L2. The L1 cache offers low cost on cache hit, but could suffer
collision under circumstances. This is complemented by the L2 LRU cache, which
is slower on cache access (overhead from linear search + reordering), but solves
collison of L1 rather well.
Previously we had a general detection and support of reentrancy, at the cost of
having branches and inc / dec operations on fast paths. To avoid taxing fast
paths, we move the reentrancy operations onto tsd slow state, and only modify
reentrancy level around external calls (that might trigger reentrancy).
Added tsd_state_nominal_slow, which on fast path malloc() incorporates
tcache_enabled check, and on fast path free() bundles both malloc_slow and
tcache_enabled branches.
With this change, when profiling is enabled, we avoid doing redundant rtree
lookups. Also changed dalloc_atx_t to alloc_atx_t, as it's now used on
allocation path as well (to speed up profiling).
This is a biggy. jemalloc_internal.h has been doing multiple jobs for a while
now:
- The source of system-wide definitions.
- The catch-all include file.
- The module header file for jemalloc.c
This commit splits up this functionality. The system-wide definitions
responsibility has moved to jemalloc_preamble.h. The catch-all include file is
now jemalloc_internal_includes.h. The module headers for jemalloc.c are now in
jemalloc_internal_[externs|inlines|types].h, just as they are for the other
modules.
This checks whether or not we're reentrant using thread-local data, and, if we
are, moves certain internal allocations to use arena 0 (which should be properly
initialized after bootstrapping).
The immediate thing this allows is spinning up threads in arena_new, which will
enable spinning up background threads there.
1) Re-organize TSD so that frequently accessed fields are closer to the
beginning and more compact. Assuming 64-bit, the first 2.5 cachelines now
contains everything needed on tcache fast path, expect the tcache struct itself.
2) Re-organize tcache and tbins. Take lg_fill_div out of tbin, and reduce tbin
to 24 bytes (down from 32). Split tbins into tbins_small and tbins_large, and
place tbins_small close to the beginning.
The embedded tcache is initialized upon tsd initialization. The avail arrays
for the tbins will be allocated / deallocated accordingly during init / cleanup.
With this change, the pointer to the auto tcache will always be available, as
long as we have access to the TSD. tcache_available() (called in tcache_get())
is provided to check if we should use tcache.
This will facilitate embedding tcache into tsd, which will require proper
initialization cannot be done via the static initializer. Make tsd->rtree_ctx
to be initialized via rtree_ctx_data_init().
Compact extent_t to 128 bytes on 64-bit systems by moving
arena_slab_data_t's nfree into extent_t's e_bits.
Cacheline-align extent_t structures so that they always cross the
minimum number of cacheline boundaries.
Re-order extent_t fields such that all fields except the slab bitmap
(and overlaid heap profiling context pointer) are in the first
cacheline.
This resolves#461.
Remove tree-structured bitmap support, in order to reduce complexity and
ease maintenance. No bitmaps larger than 512 bits have been necessary
since before 4.0.0, and there is no current plan that would increase
maximum bitmap size. Although tree-structured bitmaps were used on
32-bit platforms prior to this change, the overall benefits were
questionable (higher metadata overhead, higher bitmap modification cost,
marginally lower search cost).
This fixes an extent searching regression on 32-bit systems, caused by
the initial bitmap_ffu() implementation in
c8021d01f6 (Implement bitmap_ffu(), which
finds the first unset bit.), as first used in
5d33233a5e (Use a bitmap in extents_t to
speed up search.).
A fixed max spin count is used -- with benchmark results showing it
solves almost all problems. As the benchmark used was rather intense,
the upper bound could be a little bit high. However it should offer a
good tradeoff between spinning and blocking.
Use tsd_rtree_ctx() rather than tsdn_rtree_ctx() when tcache is
non-NULL, in order to avoid an extra branch (and potentially extra stack
space) in the fast path.
If a single virtual adddress pointer has enough unused bits to pack
{szind_t, extent_t *, bool, bool}, use a single pointer-sized field in
each rtree leaf element, rather than using three separate fields. This
has little impact on access speed (fewer loads/stores, but more bit
twiddling), except that denser representation increases TLB
effectiveness.
Expand and restructure the rtree API such that all common operations can
be achieved with minimal work, regardless of whether the rtree leaf
fields are independent versus packed into a single atomic pointer.
This allows leaf elements to differ in size from internal node elements.
In principle it would be more correct to use a different type for each
level of the tree, but due to implementation details related to atomic
operations, we use casts anyway, thus counteracting the value of
additional type correctness. Furthermore, such a scheme would require
function code generation (via cpp macros), as well as either unwieldy
type names for leaves or type aliases, e.g.
typedef struct rtree_elm_d2_s rtree_leaf_elm_t;
This alternate strategy would be more correct, and with less code
duplication, but probably not worth the complexity.
Rather than storing usize only for large (and prof-promoted)
allocations, store the size class index for allocations that reside
within the extent, such that the size class index is valid for all
extents that contain extant allocations, and invalid otherwise (mainly
to make debugging simpler).
Split decay-based purging into two phases, the first of which uses lazy
purging to convert dirty pages to "muzzy", and the second of which uses
forced purging, decommit, or unmapping to convert pages to clean or
destroy them altogether. Not all operating systems support lazy
purging, yet the application may provide extent hooks that implement
lazy purging, so care must be taken to dynamically omit the first phase
when necessary.
The mallctl interfaces change as follows:
- opt.decay_time --> opt.{dirty,muzzy}_decay_time
- arena.<i>.decay_time --> arena.<i>.{dirty,muzzy}_decay_time
- arenas.decay_time --> arenas.{dirty,muzzy}_decay_time
- stats.arenas.<i>.pdirty --> stats.arenas.<i>.p{dirty,muzzy}
- stats.arenas.<i>.{npurge,nmadvise,purged} -->
stats.arenas.<i>.{dirty,muzzy}_{npurge,nmadvise,purged}
This resolves#521.
Refactor most of the decay-related functions to take as parameters the
decay_t and associated extents_t structures to operate on. This
prepares for supporting both lazy and forced purging on different decay
schedules.
These were all size_ts, so we have atomics support for them on all platforms, so
the conversion is straightforward.
Left non-atomic is curlextents, which AFAICT is not used atomically anywhere.
I expect this to be the trickiest conversion we will see, since we want atomics
on 64-bit platforms, but are also always able to piggyback on some sort of
external synchronization on non-64 bit platforms.
In the process, I changed the implementation of rtree_elm_acquire so that it
won't even try to CAS if its initial read (getting the extent + lock bit)
indicates that the CAS is doomed to fail. This can significantly improve
performance under contention.
