Support millisecond resolution for decay times. Among other use cases
this makes it possible to specify a short initial dirty-->muzzy decay
phase, followed by a longer muzzy-->clean decay phase.
This resolves#812.
Add the extent_destroy_t extent destruction hook to extent_hooks_t, and
use it during arena destruction. This hook explicitly communicates to
the callee that the extent must be destroyed or tracked for later reuse,
lest it be permanently leaked. Prior to this change, retained extents
could unintentionally be leaked if extent retention was enabled.
This resolves#560.
Control use of munmap(2) via a run-time option rather than a
compile-time option (with the same per platform default). The old
behavior of --disable-munmap can be achieved with
--with-malloc-conf=munmap:false.
This partially resolves#580.
Simplify configuration by removing the --disable-tcache option, but
replace the testing for that configuration with
--with-malloc-conf=tcache:false.
Fix the thread.arena and thread.tcache.flush mallctls to work correctly
if tcache is disabled.
This partially resolves#580.
Rather than using a LIFO queue to track available extent_t structures,
use a red-black tree, and always choose the oldest/lowest available
during reuse.
Split decay-based purging into two phases, the first of which uses lazy
purging to convert dirty pages to "muzzy", and the second of which uses
forced purging, decommit, or unmapping to convert pages to clean or
destroy them altogether. Not all operating systems support lazy
purging, yet the application may provide extent hooks that implement
lazy purging, so care must be taken to dynamically omit the first phase
when necessary.
The mallctl interfaces change as follows:
- opt.decay_time --> opt.{dirty,muzzy}_decay_time
- arena.<i>.decay_time --> arena.<i>.{dirty,muzzy}_decay_time
- arenas.decay_time --> arenas.{dirty,muzzy}_decay_time
- stats.arenas.<i>.pdirty --> stats.arenas.<i>.p{dirty,muzzy}
- stats.arenas.<i>.{npurge,nmadvise,purged} -->
stats.arenas.<i>.{dirty,muzzy}_{npurge,nmadvise,purged}
This resolves#521.
Add the MALLCTL_ARENAS_ALL cpp macro as a fixed index for use
in accessing the arena.<i>.{purge,decay,dss} and stats.arenas.<i>.*
mallctls, and deprecate access via the arenas.narenas index (to be
removed in 6.0.0).
Add/rename related mallctls:
- Add stats.arenas.<i>.base .
- Rename stats.arenas.<i>.metadata to stats.arenas.<i>.internal .
- Add stats.arenas.<i>.resident .
Modify the arenas.extend mallctl to take an optional (extent_hooks_t *)
argument so that it is possible for all base allocations to be serviced
by the specified extent hooks.
This resolves#463.
Split purging into lazy and forced variants. Use the forced variant for
zeroing dss.
Add support for NULL function pointers as an opt-out mechanism for the
dalloc, commit, decommit, purge_lazy, purge_forced, split, and merge
fields of extent_hooks_t.
Add short-circuiting checks in large_ralloc_no_move_{shrink,expand}() so
that no attempt is made if splitting/merging is not supported.
This resolves#268.
This works around GitHub's broken automatic reformatting from ISO-8859-1
to UTF-8 when serving static html.
Remove <parameter/> from e.g. <function>malloc<parameter/></function>,
add a custom template that does not append parentheses, and manually
specify them, e.g. <function>malloc()</function>. This works around
apparently broken XSL formatting that causes <code/> to be emitted in
html (rather than <code></code>, or better yet, nothing).
Document that the maximum size class is limited by PTRDIFF_MAX, rather
than the full address space. This reflects changes that were part of
0c516a00c4 (Make *allocx() size class
overflow behavior defined.).
This is an alternative to the existing ratio-based unused dirty page
purging, and is intended to eventually become the sole purging
mechanism.
Add mallctls:
- opt.purge
- opt.decay_time
- arena.<i>.decay
- arena.<i>.decay_time
- arenas.decay_time
- stats.arenas.<i>.decay_time
This resolves#325.
Cascade from decommit to purge when purging unused dirty pages, so that
it is possible to decommit cleaned memory rather than just purging. For
non-Windows debug builds, decommit runs rather than purging them, since
this causes access of deallocated runs to segfault.
This resolves#251.
Add the "arena.<i>.chunk_hooks" mallctl, which replaces and expands on
the "arena.<i>.chunk.{alloc,dalloc,purge}" mallctls. The chunk hooks
allow control over chunk allocation/deallocation, decommit/commit,
purging, and splitting/merging, such that the application can rely on
jemalloc's internal chunk caching and retaining functionality, yet
implement a variety of chunk management mechanisms and policies.
Merge the chunks_[sz]ad_{mmap,dss} red-black trees into
chunks_[sz]ad_retained. This slightly reduces how hard jemalloc tries
to honor the dss precedence setting; prior to this change the precedence
setting was also consulted when recycling chunks.
Fix chunk purging. Don't purge chunks in arena_purge_stashed(); instead
deallocate them in arena_unstash_purged(), so that the dirty memory
linkage remains valid until after the last time it is used.
This resolves#176 and #201.
This rename avoids installation collisions with the upstream gperftools.
Additionally, jemalloc's per thread heap profile functionality
introduced an incompatible file format, so it's now worthwhile to
clearly distinguish jemalloc's version of this script from the upstream
version.
This resolves#229.
Add mallctls:
- arenas.lg_dirty_mult is initialized via opt.lg_dirty_mult, and can be
modified to change the initial lg_dirty_mult setting for newly created
arenas.
- arena.<i>.lg_dirty_mult controls an individual arena's dirty page
purging threshold, and synchronously triggers any purging that may be
necessary to maintain the constraint.
- arena.<i>.chunk.purge allows the per arena dirty page purging function
to be replaced.
This resolves#93.
Recent changes have improved huge allocation scalability, which removes
upward pressure to set the chunk size so large that huge allocations are
rare. Smaller chunks are more likely to completely drain, so set the
default to the smallest size that doesn't leave excessive unusable
trailing space in chunk headers.
Migrate all centralized data structures related to huge allocations and
recyclable chunks into arena_t, so that each arena can manage huge
allocations and recyclable virtual memory completely independently of
other arenas.
Add chunk node caching to arenas, in order to avoid contention on the
base allocator.
Use chunks_rtree to look up huge allocations rather than a red-black
tree. Maintain a per arena unsorted list of huge allocations (which
will be needed to enumerate huge allocations during arena reset).
Remove the --enable-ivsalloc option, make ivsalloc() always available,
and use it for size queries if --enable-debug is enabled. The only
practical implications to this removal are that 1) ivsalloc() is now
always available during live debugging (and the underlying radix tree is
available during core-based debugging), and 2) size query validation can
no longer be enabled independent of --enable-debug.
Remove the stats.chunks.{current,total,high} mallctls, and replace their
underlying statistics with simpler atomically updated counters used
exclusively for gdump triggering. These statistics are no longer very
useful because each arena manages chunks independently, and per arena
statistics provide similar information.
Simplify chunk synchronization code, now that base chunk allocation
cannot cause recursive lock acquisition.
Add the MALLOCX_TCACHE() and MALLOCX_TCACHE_NONE macros, which can be
used in conjunction with the *allocx() API.
Add the tcache.create, tcache.flush, and tcache.destroy mallctls.
This resolves#145.
This feature makes it possible to toggle the gdump feature on/off during
program execution, whereas the the opt.prof_dump mallctl value can only
be set during program startup.
This resolves#72.
There are three categories of metadata:
- Base allocations are used for bootstrap-sensitive internal allocator
data structures.
- Arena chunk headers comprise pages which track the states of the
non-metadata pages.
- Internal allocations differ from application-originated allocations
in that they are for internal use, and that they are omitted from heap
profiles.
The metadata statistics comprise the metadata categories as follows:
- stats.metadata: All metadata -- base + arena chunk headers + internal
allocations.
- stats.arenas.<i>.metadata.mapped: Arena chunk headers.
- stats.arenas.<i>.metadata.allocated: Internal allocations. This is
reported separately from the other metadata statistics because it
overlaps with the allocated and active statistics, whereas the other
metadata statistics do not.
Base allocations are not reported separately, though their magnitude can
be computed by subtracting the arena-specific metadata.
This resolves#163.
In addition to true/false, opt.junk can now be either "alloc" or "free",
giving applications the possibility of junking memory only on allocation
or deallocation.
This resolves#172.
Add per size class huge allocation statistics, and normalize various
stats:
- Change the arenas.nlruns type from size_t to unsigned.
- Add the arenas.nhchunks and arenas.hchunks.<i>.size mallctl's.
- Replace the stats.arenas.<i>.bins.<j>.allocated mallctl with
stats.arenas.<i>.bins.<j>.curregs .
- Add the stats.arenas.<i>.hchunks.<j>.nmalloc,
stats.arenas.<i>.hchunks.<j>.ndalloc,
stats.arenas.<i>.hchunks.<j>.nrequests, and
stats.arenas.<i>.hchunks.<j>.curhchunks mallctl's.
atexit(3) can deadlock internally during its own initialization if
jemalloc calls atexit() during jemalloc initialization. Mitigate the
impact by restructuring prof initialization to avoid calling atexit()
unless the registered function will actually dump a final heap profile.
Additionally, disable prof_final by default so that this land mine is
opt-in rather than opt-out.
This resolves#144.
According to the docbook documentation for <funcprototype>, its parent
must be <funcsynopsis>; fix accordingly. Nonetheless, the man page
processor fails badly when this construct is embedded in a <para> (which
is documented to be legal), although the html processor does fine.
This adds support for expanding huge allocations in-place by requesting
memory at a specific address from the chunk allocator.
It's currently only implemented for the chunk recycling path, although
in theory it could also be done by optimistically allocating new chunks.
On Linux, it could attempt an in-place mremap. However, that won't work
in practice since the heap is grown downwards and memory is not unmapped
(in a normal build, at least).
Repeated vector reallocation micro-benchmark:
#include <string.h>
#include <stdlib.h>
int main(void) {
for (size_t i = 0; i < 100; i++) {
void *ptr = NULL;
size_t old_size = 0;
for (size_t size = 4; size < (1 << 30); size *= 2) {
ptr = realloc(ptr, size);
if (!ptr) return 1;
memset(ptr + old_size, 0xff, size - old_size);
old_size = size;
}
free(ptr);
}
}
The glibc allocator fails to do any in-place reallocations on this
benchmark once it passes the M_MMAP_THRESHOLD (default 128k) but it
elides the cost of copies via mremap, which is currently not something
that jemalloc can use.
With this improvement, jemalloc still fails to do any in-place huge
reallocations for the first outer loop, but then succeeds 100% of the
time for the remaining 99 iterations. The time spent doing allocations
and copies drops down to under 5%, with nearly all of it spent doing
purging + faulting (when huge pages are disabled) and the array memset.
An improved mremap API (MREMAP_RETAIN - #138) would be far more general
but this is a portable optimization and would still be useful on Linux
for xallocx.
Numbers with transparent huge pages enabled:
glibc (copies elided via MREMAP_MAYMOVE): 8.471s
jemalloc: 17.816s
jemalloc + no-op madvise: 13.236s
jemalloc + this commit: 6.787s
jemalloc + this commit + no-op madvise: 6.144s
Numbers with transparent huge pages disabled:
glibc (copies elided via MREMAP_MAYMOVE): 15.403s
jemalloc: 39.456s
jemalloc + no-op madvise: 12.768s
jemalloc + this commit: 15.534s
jemalloc + this commit + no-op madvise: 6.354s
Closes#137
Implement/test/fix the opt.prof_thread_active_init,
prof.thread_active_init, and thread.prof.active mallctl's.
Test/fix the thread.prof.name mallctl.
Refactor opt_prof_active to be read-only and move mutable state into the
prof_active variable. Stop leaning on ctl-related locking for
protection.
This adds a new `sdallocx` function to the external API, allowing the
size to be passed by the caller. It avoids some extra reads in the
thread cache fast path. In the case where stats are enabled, this
avoids the work of calculating the size from the pointer.
An assertion validates the size that's passed in, so enabling debugging
will allow users of the API to debug cases where an incorrect size is
passed in.
The performance win for a contrived microbenchmark doing an allocation
and immediately freeing it is ~10%. It may have a different impact on a
real workload.
Closes#28
Rename data structures (prof_thr_cnt_t-->prof_tctx_t,
prof_ctx_t-->prof_gctx_t), and convert to storing a prof_tctx_t for
sampled objects.
Convert PROF_ALLOC_PREP() to prof_alloc_prep(), since precise backtrace
depth within jemalloc functions is no longer an issue (pprof prunes
irrelevant frames).
Implement mallctl's:
- prof.reset implements full sample data reset, and optional change of
sample interval.
- prof.lg_sample reads the current sample interval (opt.lg_prof_sample
was the permanent source of truth prior to prof.reset).
- thread.prof.name provides naming capability for threads within heap
profile dumps.
- thread.prof.active makes it possible to activate/deactivate heap
profiling for individual threads.
Modify the heap dump files to contain per thread heap profile data.
This change is incompatible with the existing pprof, which will require
enhancements to read and process the enriched data.
Refactor huge allocation to be managed by arenas (though the global
red-black tree of huge allocations remains for lookup during
deallocation). This is the logical conclusion of recent changes that 1)
made per arena dss precedence apply to huge allocation, and 2) made it
possible to replace the per arena chunk allocation/deallocation
functions.
Remove the top level huge stats, and replace them with per arena huge
stats.
Normalize function names and types to *dalloc* (some were *dealloc*).
Remove the --enable-mremap option. As jemalloc currently operates, this
is a performace regression for some applications, but planned work to
logarithmically space huge size classes should provide similar amortized
performance. The motivation for this change was that mremap-based huge
reallocation forced leaky abstractions that prevented refactoring.
Add new mallctl endpoints "arena<i>.chunk.alloc" and
"arena<i>.chunk.dealloc" to allow userspace to configure
jemalloc's chunk allocator and deallocator on a per-arena
basis.
Forcefully disable tcache if running inside Valgrind, and remove
Valgrind calls in tcache-specific code.
Restructure Valgrind-related code to move most Valgrind calls out of the
fast path functions.
Take advantage of static knowledge to elide some branches in
JEMALLOC_VALGRIND_REALLOC().
Make dss non-optional on all platforms which support sbrk(2).
Fix the "arena.<i>.dss" mallctl to return an error if "primary" or
"secondary" precedence is specified, but sbrk(2) is not supported.
Extract profiling code from malloc(), imemalign(), calloc(), realloc(),
mallocx(), rallocx(), and xallocx(). This slightly reduces the amount
of code compiled into the fast paths, but the primary benefit is the
combinatorial complexity reduction.
Simplify iralloc[t]() by creating a separate ixalloc() that handles the
no-move cases.
Further simplify [mrxn]allocx() (and by implication [mrn]allocm()) to
make request size overflows due to size class and/or alignment
constraints trigger undefined behavior (detected by debug-only
assertions).
Report ENOMEM rather than EINVAL if an OOM occurs during heap profiling
backtrace creation in imemalign(). This bug impacted posix_memalign()
and aligned_alloc().
*mallctl() always returns EINVAL and does partial result copying when
*oldlenp is to short to hold the requested value, rather than returning
ENOMEM. Therefore remove ENOMEM from the documented set of possible
errors.
Implement the *allocx() API, which is a successor to the *allocm() API.
The *allocx() functions are slightly simpler to use because they have
fewer parameters, they directly return the results of primary interest,
and mallocx()/rallocx() avoid the strict aliasing pitfall that
allocm()/rallocx() share with posix_memalign(). The following code
violates strict aliasing rules:
foo_t *foo;
allocm((void **)&foo, NULL, 42, 0);
whereas the following is safe:
foo_t *foo;
void *p;
allocm(&p, NULL, 42, 0);
foo = (foo_t *)p;
mallocx() does not have this problem:
foo_t *foo = (foo_t *)mallocx(42, 0);
Modify processing of the lg_chunk option so that it clips an
out-of-range input to the edge of the valid range. This makes it
possible to request the minimum possible chunk size without intimate
knowledge of allocator internals.
Submitted by Ian Lepore (see FreeBSD PR bin/174641).
