server-skynet-source-3rd-jemalloc/jemalloc/doc/jemalloc.3.in

.\" Copyright (c) 2009 Facebook, Inc.  All rights reserved.
.\" Copyright (c) 2006-2008 Jason Evans <jasone@canonware.com>.
.\" All rights reserved.
.\" Copyright (c) 1980, 1991, 1993
.\"	The Regents of the University of California.  All rights reserved.
.\"
.\" This code is derived from software contributed to Berkeley by
.\" the American National Standards Committee X3, on Information
.\" Processing Systems.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. Neither the name of the University nor the names of its contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\"     @(#)malloc.3	8.1 (Berkeley) 6/4/93
.\" $FreeBSD: head/lib/libc/stdlib/malloc.3 182225 2008-08-27 02:00:53Z jasone $
.\"
.Dd December 3, 2009
.Dt JEMALLOC 3
.Os
.Sh NAME
.Nm malloc , calloc , posix_memalign , realloc , free , malloc_usable_size
.Nd general purpose memory allocation functions
.Sh LIBRARY
.Lb libjemalloc
.Sh SYNOPSIS
.In stdlib.h
.In jemalloc.h
.Ft void *
.Fn @jemalloc_prefix@malloc "size_t size"
.Ft void *
.Fn @jemalloc_prefix@calloc "size_t number" "size_t size"
.Ft int
.Fn @jemalloc_prefix@posix_memalign "void **ptr" "size_t alignment" "size_t size"
.Ft void *
.Fn @jemalloc_prefix@realloc "void *ptr" "size_t size"
.Ft void
.Fn @jemalloc_prefix@free "void *ptr"
.Ft size_t
.Fn @jemalloc_prefix@malloc_usable_size "const void *ptr"
@roff_tcache@.Ft void
@roff_tcache@.Fn @jemalloc_prefix@malloc_tcache_flush "void"
.Ft const char *
.Va @jemalloc_prefix@malloc_options ;
.Ft void
.Fo \*(lp*@jemalloc_prefix@malloc_message\*(rp
.Fa "const char *p1" "const char *p2" "const char *p3" "const char *p4"
.Fc
.Sh DESCRIPTION
The
.Fn @jemalloc_prefix@malloc
function allocates
.Fa size
bytes of uninitialized memory.
The allocated space is suitably aligned
@roff_tiny@(after possible pointer coercion)
for storage of any type of object.
.Pp
The
.Fn @jemalloc_prefix@calloc
function allocates space for
.Fa number
objects,
each
.Fa size
bytes in length.
The result is identical to calling
.Fn @jemalloc_prefix@malloc
with an argument of
.Dq "number * size" ,
with the exception that the allocated memory is explicitly initialized
to zero bytes.
.Pp
The
.Fn @jemalloc_prefix@posix_memalign
function allocates
.Fa size
bytes of memory such that the allocation's base address is an even multiple of
.Fa alignment ,
and returns the allocation in the value pointed to by
.Fa ptr .
The requested
.Fa alignment
must be a power of 2 at least as large as
.Fn sizeof "void *" .
.Pp
The
.Fn @jemalloc_prefix@realloc
function changes the size of the previously allocated memory referenced by
.Fa ptr
to
.Fa size
bytes.
The contents of the memory are unchanged up to the lesser of the new and
old sizes.
If the new size is larger,
the contents of the newly allocated portion of the memory are undefined.
Upon success, the memory referenced by
.Fa ptr
is freed and a pointer to the newly allocated memory is returned.
Note that
.Fn @jemalloc_prefix@realloc
may move the memory allocation, resulting in a different return value than
.Fa ptr .
If
.Fa ptr
is
.Dv NULL ,
the
.Fn @jemalloc_prefix@realloc
function behaves identically to
.Fn @jemalloc_prefix@malloc
for the specified size.
.Pp
The
.Fn @jemalloc_prefix@free
function causes the allocated memory referenced by
.Fa ptr
to be made available for future allocations.
If
.Fa ptr
is
.Dv NULL ,
no action occurs.
.Pp
The
.Fn @jemalloc_prefix@malloc_usable_size
function returns the usable size of the allocation pointed to by
.Fa ptr .
The return value may be larger than the size that was requested during
allocation.
The
.Fn @jemalloc_prefix@malloc_usable_size
function is not a mechanism for in-place
.Fn @jemalloc_prefix@realloc ;
rather it is provided solely as a tool for introspection purposes.
Any discrepancy between the requested allocation size and the size reported by
.Fn @jemalloc_prefix@malloc_usable_size
should not be depended on, since such behavior is entirely
implementation-dependent.
@roff_tcache@.Pp
@roff_tcache@The
@roff_tcache@.Fn @jemalloc_prefix@malloc_tcache_flush
@roff_tcache@function releases all cached objects and internal data structures
@roff_tcache@associated with the calling thread's thread-specific cache.
@roff_tcache@Ordinarily, this function need not be called, since automatic
@roff_tcache@periodic incremental garbage collection occurs, and the thread
@roff_tcache@cache is automatically discarded when a thread exits.
@roff_tcache@However, garbage collection is triggered by allocation activity,
@roff_tcache@so it is possible for a thread that stops allocating/deallocating
@roff_tcache@to retain its cache indefinitely, in which case the developer may
@roff_tcache@find this function useful.
.Sh TUNING
Once, when the first call is made to one of these memory allocation
routines, various flags will be set or reset, which affects the
workings of this allocator implementation.
.Pp
The
.Dq name
of the file referenced by the symbolic link named
.Pa /etc/jemalloc.conf ,
the value of the environment variable
.Ev JEMALLOC_OPTIONS ,
and the string pointed to by the global variable
.Va @jemalloc_prefix@malloc_options
will be interpreted, in that order, from left to right as flags.
.Pp
Each flag is a single letter, optionally prefixed by a non-negative base 10
integer repetition count.
For example,
.Dq 3N
is equivalent to
.Dq NNN .
Some flags control parameter magnitudes, where uppercase increases the
magnitude, and lowercase decreases the magnitude.
Other flags control boolean parameters, where uppercase indicates that a
behavior is set, or on, and lowercase means that a behavior is not set, or off.
.Bl -tag -width indent
.It A
All warnings (except for the warning about unknown
flags being set) become fatal.
The process will call
.Xr abort 3
in these cases.
.It C
Double/halve the size of the maximum size class that is a multiple of the
cacheline size (64).
Above this size, subpage spacing (256 bytes) is used for size classes.
The default value is 512 bytes.
.It D
Halve/double the per-arena minimum ratio of active to dirty pages.
Some dirty unused pages may be allowed to accumulate, within the limit set by
the ratio, before informing the kernel about at least half of those pages via
.Xr madvise 2 .
This provides the kernel with sufficient information to recycle dirty pages if
physical memory becomes scarce and the pages remain unused.
The default minimum ratio is 32:1;
.Ev JEMALLOC_OPTIONS=6D
will disable dirty page purging.
@roff_tcache@.It G
@roff_tcache@Enable/disable incremental garbage collection of unused objects
@roff_tcache@stored in thread-specific caches.
@roff_tcache@This option is enabled by default.
@roff_tcache@.It H
@roff_tcache@When there are multiple threads, use thread-specific caching for
@roff_tcache@small and medium objects.
@roff_tcache@This option is enabled by default.
@roff_tcache@Thread-specific caching allows many allocations to be satisfied
@roff_tcache@without performing any thread synchronization, at the cost of
@roff_tcache@increased memory use.
@roff_tcache@See the
@roff_tcache@.Dq G
@roff_tcache@option for related tuning information.
@roff_fill@.It J
@roff_fill@Each byte of new memory allocated by
@roff_fill@.Fn @jemalloc_prefix@malloc
@roff_fill@or
@roff_fill@.Fn @jemalloc_prefix@realloc
@roff_fill@will be initialized to 0xa5.
@roff_fill@All memory returned by
@roff_fill@.Fn @jemalloc_prefix@free
@roff_fill@or
@roff_fill@.Fn @jemalloc_prefix@realloc
@roff_fill@will be initialized to 0x5a.
@roff_fill@This is intended for debugging and will impact performance
@roff_fill@negatively.
.It K
Double/halve the virtual memory chunk size.
The default chunk size is 16 MiB.
.It M
Double/halve the size of the maximum medium size class.
The valid range is from one page to one half chunk.
The default value is 32 KiB.
.It N
Double/halve the number of arenas.
The default number of arenas is
@roff_tcache@two
@roff_no_tcache@four
times the number of CPUs, or one if there is a single CPU.
.It P
Various statistics are printed at program exit via an
.Xr atexit 3
function.
This has the potential to cause deadlock for a multi-threaded process that exits
while one or more threads are executing in the memory allocation functions.
Therefore, this option should only be used with care; it is primarily intended
as a performance tuning aid during application development.
.It Q
Double/halve the size of the maximum size class that is a multiple of the
quantum (8 or 16 bytes, depending on architecture).
Above this size, cacheline spacing is used for size classes.
The default value is 128 bytes.
@roff_trace@.It T
@roff_trace@Write a verbose trace log to a set of files named according to the
@roff_trace@pattern
@roff_trace@.Pa jemtr.<pid>.<arena>
@roff_trace@for all allocation operations.
@roff_trace@The result can be converted from
@roff_trace@.Nm jemtr
@roff_trace@to
@roff_trace@.Nm mtr
@roff_trace@format via
@roff_trace@.Xr jemtr2mtr 1 ,
@roff_trace@the output of which can be used by
@roff_trace@.Xr mtrplay 1
@roff_trace@and
@roff_trace@.Xr mtrgraph 1 .
@roff_sysv@.It V
@roff_sysv@Attempting to allocate zero bytes will return a
@roff_sysv@.Dv NULL
@roff_sysv@pointer instead of a valid pointer.
@roff_sysv@(The default behavior is to make a minimal allocation and return a
@roff_sysv@pointer to it.)
@roff_sysv@This option is provided for System V compatibility.
@roff_sysv@@roff_xmalloc@This option is incompatible with the
@roff_sysv@@roff_xmalloc@.Dq X
@roff_sysv@@roff_xmalloc@option.
@roff_xmalloc@.It X
@roff_xmalloc@Rather than return failure for any allocation function, display a
@roff_xmalloc@diagnostic message on
@roff_xmalloc@.Dv STDERR_FILENO
@roff_xmalloc@and cause the program to drop core (using
@roff_xmalloc@.Xr abort 3 ) .
@roff_xmalloc@This option should be set at compile time by including the
@roff_xmalloc@following in the source code:
@roff_xmalloc@.Bd -literal -offset indent
@roff_xmalloc@@jemalloc_prefix@malloc_options = "X";
@roff_xmalloc@.Ed
@roff_fill@.It Z
@roff_fill@Each byte of new memory allocated by
@roff_fill@.Fn @jemalloc_prefix@malloc
@roff_fill@or
@roff_fill@.Fn @jemalloc_prefix@realloc
@roff_fill@will be initialized to 0.
@roff_fill@Note that this initialization only happens once for each byte, so
@roff_fill@.Fn @jemalloc_prefix@realloc
@roff_fill@calls do not zero memory that was previously allocated.
@roff_fill@This is intended for debugging and will impact performance
@roff_fill@negatively.
.El
.Pp
@roff_fill@The
@roff_fill@.Dq J
@roff_fill@and
@roff_fill@.Dq Z
@roff_fill@options are intended for testing and debugging.
@roff_fill@An application which changes its behavior when these options are used
@roff_fill@is flawed.
.Sh IMPLEMENTATION NOTES
@roff_dss@Traditionally, allocators have used
@roff_dss@.Xr sbrk 2
@roff_dss@to obtain memory, which is suboptimal for several reasons, including
@roff_dss@race conditions, increased fragmentation, and artificial limitations
@roff_dss@on maximum usable memory.
@roff_dss@This allocator uses both
@roff_dss@.Xr sbrk 2
@roff_dss@and
@roff_dss@.Xr mmap 2 ,
@roff_dss@in that order of preference.
.Pp
This allocator uses multiple arenas in order to reduce lock contention for
threaded programs on multi-processor systems.
This works well with regard to threading scalability, but incurs some costs.
There is a small fixed per-arena overhead, and additionally, arenas manage
memory completely independently of each other, which means a small fixed
increase in overall memory fragmentation.
These overheads are not generally an issue, given the number of arenas normally
used.
Note that using substantially more arenas than the default is not likely to
improve performance, mainly due to reduced cache performance.
However, it may make sense to reduce the number of arenas if an application
does not make much use of the allocation functions.
.Pp
@roff_tcache@In addition to multiple arenas, this allocator supports
@roff_tcache@thread-specific caching for small and medium objects, in order to
@roff_tcache@make it possible to completely avoid synchronization for most small
@roff_tcache@and medium allocation requests.
@roff_tcache@Such caching allows very fast allocation in the common case, but it
@roff_tcache@increases memory usage and fragmentation, since a bounded number of
@roff_tcache@objects can remain allocated in each thread cache.
@roff_tcache@.Pp
Memory is conceptually broken into equal-sized chunks, where the chunk size is
a power of two that is greater than the page size.
Chunks are always aligned to multiples of the chunk size.
This alignment makes it possible to find metadata for user objects very
quickly.
.Pp
User objects are broken into four categories according to size: small, medium,
large, and huge.
Small objects are smaller than one page.
Medium objects range from one page to an upper limit determined at run time (see
the
.Dq M
option).
Large objects are smaller than the chunk size.
Huge objects are a multiple of the chunk size.
Small, medium, and large objects are managed by arenas; huge objects are managed
separately in a single data structure that is shared by all threads.
Huge objects are used by applications infrequently enough that this single
data structure is not a scalability issue.
.Pp
Each chunk that is managed by an arena tracks its contents as runs of
contiguous pages (unused, backing a set of small or medium objects, or backing
one large object).
The combination of chunk alignment and chunk page maps makes it possible to
determine all metadata regarding small and large allocations in constant time.
.Pp
Small and medium objects are managed in groups by page runs.
Each run maintains a bitmap that tracks which regions are in use.
@roff_tiny@Allocation requests that are no more than half the quantum (8 or 16,
@roff_tiny@depending on architecture) are rounded up to the nearest power of
@roff_tiny@two.
Allocation requests that are
@roff_tiny@more than half the quantum, but
no more than the minimum cacheline-multiple size class (see the
.Dq Q
option) are rounded up to the nearest multiple of the
@roff_tiny@quantum.
@roff_no_tiny@quantum (8 or 16, depending on architecture).
Allocation requests that are more than the minumum cacheline-multiple size
class, but no more than the minimum subpage-multiple size class (see the
.Dq C
option) are rounded up to the nearest multiple of the cacheline size (64).
Allocation requests that are more than the minimum subpage-multiple size class,
but no more than the maximum subpage-multiple size class are rounded up to the
nearest multiple of the subpage size (256).
Allocation requests that are more than the maximum subpage-multiple size class,
but no more than the maximum medium size class (see the
.Dq M
option) are rounded up to the nearest medium size class; spacing is an
automatically determined power of two and ranges from the subpage size to the
page size.
Allocation requests that are more than the maximum medium size class, but small
enough to fit in an arena-managed chunk (see the
.Dq K
option), are rounded up to the nearest run size.
Allocation requests that are too large to fit in an arena-managed chunk are
rounded up to the nearest multiple of the chunk size.
.Pp
Allocations are packed tightly together, which can be an issue for
multi-threaded applications.
If you need to assure that allocations do not suffer from cacheline sharing,
round your allocation requests up to the nearest multiple of the cacheline
size.
.Sh DEBUGGING MALLOC PROBLEMS
The first thing to do is to set the
.Dq A
option.
This option forces a coredump (if possible) at the first sign of trouble,
rather than the normal policy of trying to continue if at all possible.
.Pp
It is probably also a good idea to recompile the program with suitable
options and symbols for debugger support.
.Pp
@roff_fill@If the program starts to give unusual results, coredump or generally
@roff_fill@behave differently without emitting any of the messages mentioned in
@roff_fill@the next section, it is likely because it depends on the storage
@roff_fill@being filled with zero bytes.
@roff_fill@Try running it with the
@roff_fill@.Dq Z
@roff_fill@option set;
@roff_fill@if that improves the situation, this diagnosis has been confirmed.
@roff_fill@If the program still misbehaves,
@roff_fill@the likely problem is accessing memory outside the allocated area.
@roff_fill@.Pp
@roff_fill@Alternatively, if the symptoms are not easy to reproduce, setting the
@roff_fill@.Dq J
@roff_fill@option may help provoke the problem.
@roff_fill@.Pp
@roff_stats@In truly difficult cases, the
@roff_stats@.Dq U
@roff_stats@option can provide a detailed trace of all calls made to these
@roff_stats@functions.
@roff_stats@.Pp
Unfortunately this implementation does not provide much detail about
the problems it detects; the performance impact for storing such information
would be prohibitive.
There are a number of allocator implementations available on the Internet
which focus on detecting and pinpointing problems by trading performance for
extra sanity checks and detailed diagnostics.
.Sh DIAGNOSTIC MESSAGES
If any of the memory allocation/deallocation functions detect an error or
warning condition, a message will be printed to file descriptor
.Dv STDERR_FILENO .
Errors will result in the process dumping core.
If the
.Dq A
option is set, all warnings are treated as errors.
.Pp
The
.Va @jemalloc_prefix@malloc_message
variable allows the programmer to override the function which emits
the text strings forming the errors and warnings if for some reason
the
.Dv STDERR_FILENO
file descriptor is not suitable for this.
Please note that doing anything which tries to allocate memory in
this function is likely to result in a crash or deadlock.
.Pp
All messages are prefixed by
.Dq <jemalloc>: .
.Sh RETURN VALUES
The
.Fn @jemalloc_prefix@malloc
and
.Fn @jemalloc_prefix@calloc
functions return a pointer to the allocated memory if successful; otherwise
a
.Dv NULL
pointer is returned and
.Va errno
is set to
.Er ENOMEM .
.Pp
The
.Fn @jemalloc_prefix@posix_memalign
function returns the value 0 if successful; otherwise it returns an error value.
The
.Fn @jemalloc_prefix@posix_memalign
function will fail if:
.Bl -tag -width Er
.It Bq Er EINVAL
The
.Fa alignment
parameter is not a power of 2 at least as large as
.Fn sizeof "void *" .
.It Bq Er ENOMEM
Memory allocation error.
.El
.Pp
The
.Fn @jemalloc_prefix@realloc
function returns a pointer, possibly identical to
.Fa ptr ,
to the allocated memory
if successful; otherwise a
.Dv NULL
pointer is returned, and
.Va errno
is set to
.Er ENOMEM
if the error was the result of an allocation failure.
The
.Fn @jemalloc_prefix@realloc
function always leaves the original buffer intact
when an error occurs.
.Pp
The
.Fn @jemalloc_prefix@free
function returns no value.
.Pp
The
.Fn @jemalloc_prefix@malloc_usable_size
function returns the usable size of the allocation pointed to by
.Fa ptr .
.Sh ENVIRONMENT
The following environment variables affect the execution of the allocation
functions:
.Bl -tag -width ".Ev JEMALLOC_OPTIONS"
.It Ev JEMALLOC_OPTIONS
If the environment variable
.Ev JEMALLOC_OPTIONS
is set, the characters it contains will be interpreted as flags to the
allocation functions.
.El
.Sh EXAMPLES
To dump core whenever a problem occurs:
.Pp
.Bd -literal -offset indent
ln -s 'A' /etc/jemalloc.conf
.Ed
.Pp
To specify in the source that a program does no return value checking
on calls to these functions:
.Bd -literal -offset indent
@jemalloc_prefix@malloc_options = "X";
.Ed
.Sh SEE ALSO
.Xr mtrgraph 1 ,
.Xr mtrplay 1 ,
.Xr jemtr2mtr 1 ,
.Xr madvise 2 ,
.Xr mmap 2 ,
.Xr sbrk 2 ,
.Xr alloca 3 ,
.Xr atexit 3 ,
.Xr getpagesize 3
.Sh STANDARDS
The
.Fn @jemalloc_prefix@malloc ,
.Fn @jemalloc_prefix@calloc ,
.Fn @jemalloc_prefix@realloc
and
.Fn @jemalloc_prefix@free
functions conform to
.St -isoC .
.Pp
The
.Fn @jemalloc_prefix@posix_memalign
function conforms to
.St -p1003.1-2001 .