Split decay-based purging into two phases, the first of which uses lazy
purging to convert dirty pages to "muzzy", and the second of which uses
forced purging, decommit, or unmapping to convert pages to clean or
destroy them altogether. Not all operating systems support lazy
purging, yet the application may provide extent hooks that implement
lazy purging, so care must be taken to dynamically omit the first phase
when necessary.
The mallctl interfaces change as follows:
- opt.decay_time --> opt.{dirty,muzzy}_decay_time
- arena.<i>.decay_time --> arena.<i>.{dirty,muzzy}_decay_time
- arenas.decay_time --> arenas.{dirty,muzzy}_decay_time
- stats.arenas.<i>.pdirty --> stats.arenas.<i>.p{dirty,muzzy}
- stats.arenas.<i>.{npurge,nmadvise,purged} -->
stats.arenas.<i>.{dirty,muzzy}_{npurge,nmadvise,purged}
This resolves#521.
Refactor most of the decay-related functions to take as parameters the
decay_t and associated extents_t structures to operate on. This
prepares for supporting both lazy and forced purging on different decay
schedules.
These were all size_ts, so we have atomics support for them on all platforms, so
the conversion is straightforward.
Left non-atomic is curlextents, which AFAICT is not used atomically anywhere.
I expect this to be the trickiest conversion we will see, since we want atomics
on 64-bit platforms, but are also always able to piggyback on some sort of
external synchronization on non-64 bit platforms.
This has the dual advantages of allowing for sparsely used large
allocations, and relying on the kernel to supply zeroed pages, which
tends to be very fast on modern systems.
In the process, I changed the implementation of rtree_elm_acquire so that it
won't even try to CAS if its initial read (getting the extent + lock bit)
indicates that the CAS is doomed to fail. This can significantly improve
performance under contention.
The new feature, opt.percpu_arena, determines thread-arena association
dynamically based CPU id. Three modes are supported: "percpu", "phycpu"
and disabled.
"percpu" uses the current core id (with help from sched_getcpu())
directly as the arena index, while "phycpu" will assign threads on the
same physical CPU to the same arena. In other words, "percpu" means # of
arenas == # of CPUs, while "phycpu" has # of arenas == 1/2 * (# of
CPUs). Note that no runtime check on whether hyper threading is enabled
is added yet.
When enabled, threads will be migrated between arenas when a CPU change
is detected. In the current design, to reduce overhead from reading CPU
id, each arena tracks the thread accessed most recently. When a new
thread comes in, we will read CPU id and update arena if necessary.
When witness is enabled, lock rank order needs to be preserved during
prefork, not only for each arena, but also across arenas. This change
breaks arena_prefork into further stages to ensure valid rank order
across arenas. Also changed test/unit/fork to use a manual arena to
catch this case.
In the process, we can do some strength reduction, changing the fetch-adds and
fetch-subs to be simple loads followed by stores, since the modifications all
occur while holding the mutex.
The C11 atomics backport removed this #define, which degraded atomic 64-bit
reads to require a lock even on platforms that support them. This commit fixes
that.
This fixes tcache_flush for manual tcaches, which wasn't able to find
the correct arena it associated with. Also changed the decay test to
cover this case (by using manually created arenas).
This simplifies what would be pairing heap operations to the equivalent
of LIFO queue operations. This is a complementary optimization in the
context of delayed coalescing for cached extents.
These functions select the easiest-to-remove element in the heap, which
is either the most recently inserted aux list element or the root. If
no calls are made to first() or remove_first(), the behavior (and time
complexity) is the same as for a LIFO queue.
Rather than purging uncoalesced extents, perform just enough incremental
coalescing to purge only fully coalesced extents. In the absence of
cached extent reuse, the immediate versus delayed incremental purging
algorithms result in the same purge order.
This resolves#655.
Fix the test_decay_ticker test to carefully control slab
creation/destruction such that the decay backlog reliably reaches zero.
Use an isolated arena so that no extraneous allocation can confuse the
situation. Speed up time during the latter part of the test so that the
entire decay time can expire in a reasonable amount of wall time.
In the C11 atomics backport, we couldn't use not_reached() in
atomic_enum_to_builtin (in atomic_gcc_atomic.h), since atomic.h was hermetic and
assert.h wasn't; there was a dependency issue. assert.h is hermetic now, so we
can include it.
This is the first header refactoring diff, #533. It splits the assert and util
components into separate, hermetic, header files. In the process, it splits out
two of the large sub-components of util (the stdio.h replacement, and bit
manipulation routines) into their own components (malloc_io.h and bit_util.h).
This is mostly to break up cyclic dependencies, but it also breaks off a good
chunk of the catch-all-ness of util, which is nice.
Convert the nrequests field to be partially derived, and the curlextents
to be fully derived, in order to reduce the number of stats updates
needed during common operations.
This change affects ndalloc stats during arena reset, because it is no
longer possible to cancel out ndalloc effects (curlextents would become
negative).
This introduces a backport of C11 atomics. It has four implementations; ranked
in order of preference, they are:
- GCC/Clang __atomic builtins
- GCC/Clang __sync builtins
- MSVC _Interlocked builtins
- C11 atomics, from <stdatomic.h>
The primary advantages are:
- Close adherence to the standard API gives us a defined memory model.
- Type safety: atomic objects are now separate types from non-atomic ones, so
that it's impossible to mix up atomic and non-atomic updates (which is
undefined behavior that compilers are starting to take advantage of).
- Efficiency: we can specify ordering for operations, avoiding fences and
atomic operations on strongly ordered architectures (example:
`atomic_write_u32(ptr, val);` involves a CAS loop, whereas
`atomic_store(ptr, val, ATOMIC_RELEASE);` is a plain store.
This diff leaves in the current atomics API (implementing them in terms of the
backport). This lets us transition uses over piecemeal.
Testing:
This is by nature hard to test. I've manually tested the first three options on
Linux on gcc by futzing with the #defines manually, on freebsd with gcc and
clang, on MSVC, and on OS X with clang. All of these were x86 machines though,
and we don't have any test infrastructure set up for non-x86 platforms.
In the long term, we'll transition to C99-style inline semantics. In the
short-term, this will allow both styles to coexist without breaking one another.
This avoids signed/unsigned comparison warnings when specifying integer
constants as inputs.
Clean up whitespace and add clarifying parentheses for
CONF_HANDLE_SIZE_T(opt_lg_chunk, ...).
Detect whether chunks start off as THP-capable by default (according to
the state of /sys/kernel/mm/transparent_hugepage/enabled), and use this
as the basis for whether to call pages_nohuge() once per chunk during
first purge of any of the chunk's page runs.
Add the --disable-thp configure option, as well as the the opt.thp
mallctl.
This resolves#541.
Convert CFLAGS to be a concatenation:
CFLAGS := CONFIGURE_CFLAGS SPECIFIED_CFLAGS EXTRA_CFLAGS
This ordering makes it possible to override the flags set by the
configure script both during and after configuration, with CFLAGS and
EXTRA_CFLAGS, respectively.
This resolves#619.
When multiple threads calling stats_print, race could happen as we read the
counters in separate mallctl calls; and the removed assertion could fail when
other operations happened in between the mallctl calls. For simplicity, output
"race" in the utilization field in this case.
This resolves#616.
Fix lg_chunk clamping to take into account cache-oblivious large
allocation. This regression only resulted in incorrect behavior if
!config_fill (false unless --disable-fill specified) and
config_cache_oblivious (true unless --disable-cache-oblivious
specified).
This regression was introduced by
8a03cf039c (Implement cache index
randomization for large allocations.), which was first released in
4.0.0.
This resolves#555.
